Electrically Heated Titling Crucible Furnaces: Top Choice in Selangor, Penang, Malaysia, Singapore (SG), Phillipines, Thailand LINGTEC INSTRUMENTS SDN BHD

Description

When a high quality melt and a high melting performance are required, electrically heated tilting furnaces are the first choice.

At the same time, these models offer a high level of energy efficiency and are suitable for both for pre-melting as well as for direct pouring into the mould.

With precise regulation of the tilting speed and accurate temperature control, electrically heated tilting furnaces are versatile applicable. They can be moved to other locations without much effort.

The installation of an exhaust system is not necessary. Operation is noiseless. THERM-CONCEPT tilting furnaces with electric heating are equipped with high-quality insulating materials and are characterised by extremely low heat losses.

Technical Features

Robust furnace constructions
Comfortable working on the furnace due to very low outer wall temperature
Low energy consumption, low electricity costs due to excellent thermal insulation
Low heat loss, excellent efficiency
High-quality heating elements mounted on ceramic support tubes, with free heat radiation into the furnace chamber and high energy efficiency
Low surface load of the heating elements for reduced wear and longer service life
Uniform heating of the melt and the crucible through 3-sided heating of the crucible ensures excellent metal quality
Crucible optimally protected by refractory concret cover plate, removable for inspection and repair work
Ladle hole rim covered with heat-resistant cast iron ring, thus protected from damage
Cast iron ring embedded in cover plate
Standard crucibles of well-known brand manufacturers included in the scope of delivery
Heating elements can be replaced individually and very easily
Practical emergency outlet for safe discharge of the melt in the event of crucible leakage
Connecting cable between switchgear and furnace in protective metal conduit, optimum protection against damage
Low maintenance costs

Also available as holding furnaces with lower connected loads

Options

Melt bath control incl. bath thermocouple for direct and precise temperature control in the melt
Increased connected load for higher melting capacity
Multi-stage switchgear to minimise the load on the grid
Thyristor control for gentle control of the heating and silent operation
Operating hours counter for monitoring crucible service life
kWh – Meter for calculation and cost monitoring
Switchgear cabinet cooling unit
Pneumatic lid opening
Working platforms for convenient loading
Standard crucibles from well-known brand manufacturers
Crucible leakage detection with alarm message

Tehcnical Data

Model	Crucible	Capacity		Melting power*		Power	Tmax	External dimensions
Model	Crucible	kg Al	kg Cu	kg/h Al	kg/h Cu	Power	Furnace chamber	Width × Depth × Height
TA 30/12/K	A 70	20		32		18	1200	1660 × 1240 × 2020
TA 50/12/K	A 150	45		43		21	1200	1600 × 1400 × 1250
TA 100/12/K	A 300	90		58		26	1200	1840 × 1530 × 2500
TA 200/12/K	TP 287	180		130		54	1200	2100 × 1400 × 2700
TA 350/12/K	TP 412	330		160		67	1200	2000 × 1650 × 3150
TA 600/12/K	TP 587	570		210		82	1200	2150 × 1900 × 3570
TA 800/12/K	TBN 800	750		260		103	1200	2420 × 1960 × 3600
TK 70/13/K	A 70	20	70	32	47	18	1300	1660 × 1240 × 2020
TK 150/13/K	A 150	45	150	43	63	20	1300	1600 × 1400 × 1250
TK 300/13/K	A 300	90	300	58	84	26	1300	1840 × 1530 × 2500
TK 500/13/K	TP 287	180	550	130	190	54	1300	2100 × 1400 × 2700
Other sizes on request. Height without lid to top edge of collar plate. *The melting capacity refers to normal industry use in continuous operation with at least 30% molten metal (swamp) in the crucible. The furnace chamber temperature is at least 50 °C above the set melting temperature.

More detail about LINGTEC INSTRUMENTS SDN BHD