About JAINNHER JHC-12
| ITEM | UNIT | JHC-12BN | JHC-12H / JHC-12S | |
| CAPACITY | Standard Work Rest Dia | mm | Ø1 ̴ Ø25 | |
| Special Work Rest Dia | mm | Ø25 ̴ Ø40 | ||
| WHEELHEAD | Grinding Wheel Size | D x W x H | Ø305 x 150 x 120 | |
| Regulating Wheel Size | D x W x H | Ø205 x 150 x 90 | ||
| Grinding Wheel Speed | rpm | 1,900 | ||
| MOTOR | Regulating Wheel Speed | rpm | 20 – 337 (7 Steps) | 10-300 (Variable Speed) |
| Grinding Wheel Motor | HP | 7.5 | ||
| Regulating Wheel Motor | HP | 1 | 2 | |
| Hydraulic Pump Motor | HP | 1 (2 For H Type) | ||
| Coolant Pump Motor | HP | 1/8 | ||
| HANDWHEEL | Regulating Wheel Feed | mm | 4 (Rev) 0.02 (Gra) | |
| Table Feed On Handwheel | mm | 7 (Rev) 0.05 (Gra) | ||
| Table Micro Feed On Handwheel | mm | 2 (Rev) 0.01 (Gra) | ||
| Dressing | mm | 1.25 (Rev) 0.01 (Gra) | ||
| Regulating Wheel Tilt Angle | +5° ̴ -3° | |||
| Regulating Wheel Swivel Angle | +5° | |||
| Floor Space | mm | 1,800 * 1,400 * 1,400 | ||
| Machine Weight | kgs | 1,600 / 1,750 | ||
| Size of case (L x W x H) | mm | 2300 x 1100 x 1800 | ||
| •Specification is subject to change without further notice. | ||||
Malaysia
