Awlgrip Max COR CF

Description

Intended Uses
Max Cor CF is a high solids two component anti-corrosive, chromate-free epoxy primer for aluminum and steel with excellent chemical and solvent resistance. Max Cor CF is based on 'Controlled Fusion' (CF) technology, a unique chemical system that allows extended re-coat times, removes the need for sanding prior to applying the next coat and also gives excellent substrate adhesion.

The technology eliminates the requirement for high hazard chemicals and ensures a tightly fused intercoat layer between the CF-based coating and the next applied coat. For above the waterline only.

Specification Data

Volume Solids	56%
Specific Gravity	1.20
Available Packs	Base available in a 1 gallon pack, converter in a ½ gallon pack. Typical Shelf Life - 2 years
Base	OR4330
Converter	OR3330
Reducer	Do not thin/reduce
Equipment Cleaning	T0006, T0176 (NA only), Acetone or M.E.K.

Application
Application equipment and parameters are given as a guide. Actual equipment choices will vary according to application conditions, equipment condition and other factors. Testing on a non-critical area should be carried out prior to full-scale application. 

Spray only. Apply one smooth wet coat. Substrate may be visible through dry film. Do not exceed maximum recommended dry film thickness.

More detail about KSJ Global Sdn Bhd