Description
Shrink Fit Chuck Standard Version
DIN 69893-1 · HSK-A32
Shrink fit chuck suitable to all kind of shrink fit units.
DIN 69893-1
- Heat resistant hot-working steel
- Hardened 54 – 2 HRC
- For HSS and solid carbide tools
- Shank tolerance h6
- With threaded holes in order to balance with balancing screws
- Cooling with Cool Jet for an extra charge
- Cooling with Cool Flash for an extra charge
- Delivery comprises: Shrink fit chuck with backup screw, without coolant tube
Technical data subjects to change without prior notice.
Standard version, similar to DIN 69882-8.
 |
The most important features:
1. High runout accuracy (< 0.003 mm)
2. Extreme clamping torque by high pressing in the clamping bore
3. Short chamfer
4. Dynamic form: Reinforced shank at long tool holders. Compromise between slimness (marginal interference contour) and rigidity
5. Cool Jet (on request)
6. Threaded bores for simple and fast balancing with screws |
 |
Cool Jet (optional)
- Optimized coolant bores, aimed at center
- Coolant directly to the cutting edge
- Extended tool life up to 100%
- Higher reliability of cutting process
- No more balls of chips on tool
- Cool Jet starting from shank diameter 6 mm
|
 |
Cool Flash (optional)
- Optimized coolant bores with coolant outlet through slots
- Coolant directly to the cutting edge
- Extended tool life up to 100%
- No more balls of chips on tool
- Optimized runout accuracy! No additional unbalance! No disturbing clearance!
- Cool Flash available for shank diameter 6 - 25 mm
|
Technical drawing
Please select your clamping diameter:
| Clamping Ø D1 [mm] |
Ø D2 [mm] |
Ø D3 [mm] |
L [mm] |
| 3 |
10 |
- |
9 |
| 4 |
10 |
- |
12 |
| 5 |
10 |
- |
15 |
| 6 |
21 |
27 |
36 |
| 8 |
21 |
27 |
36 |
| 10 |
24 |
32 |
42 |
More detail about MACHINE TERMINAL (PG) SDN BHD
Malaysia
