Selecting a Solvent Degreaser Spray for Industrial Parts
TL;DR: Choose Spanjaard Rapidkleen for heavy duty factory maintenance. Prioritize this strong and fast dry solvent industrial cleaner spray for removing grease, oil, and contaminants. It is suitable if you need to clean the parts and machine effectively in Malaysia for under RM30.
Features
- High-Solvency Action: The chemical composition breaks down heavy grease, industrial oils, and stubborn glue residues on contact.
- Zero-Residue Evaporation: The liquid transitions to a gas phase rapidly, leaving no oily film or chemical shadow that could interfere with subsequent bonding or painting.
- Mechanical Displacement: The high-pressure aerosol delivery utilizes kinetic force to flush out dust and debris from recessed metal geometries.
- Contaminant Suspension: Once sprayed, the cleaner suspends dirt particles in the solvent, allowing them to be wiped away or dripped off before evaporation.
Technical Data
- Product Identification: IMPA Code 450656
- Density: 0.76g/ml
- Physical State: Colourless liquid aerosol
- Solubility: Solvent base
- Drying Profile: Fast-drying / Flash evaporation
- Chemical Stability: Non-corrosive to most ferrous and non-ferrous metals
- Odor: Solvent-specific
.png)
Product Image
Applications
- Brake and Clutch Maintenance: Effective for removing brake fluid and dust from discs, drums, and pads to eliminate brake squeal.
- Bearing Degreasing: Removing transit grease or contaminated lubricants from new and used ball or roller bearings.
- Surface Preparation: Cleaning metal components prior to the application of adhesives, sealants, or specialized coatings.
- Adhesive Removal: Stripping glue residues from labels, tapes, or protective films in manufacturing lines.
Field Experience
A Davor customer based in Selangor manages large-scale machinery servicing at a factory in Johor. The technical team required a high-strength degreaser to handle heavy oil accumulation within tight maintenance windows. By implementing Spanjaard Rapidkleen, the service team achieved a significant reduction in manual cleaning time. The chemical’s ability to act quickly on surface to improve overall servicing efficiency, allowing the technicians to complete the maintenance cycle faster and return the equipment to operation without the delays associated with slower-acting cleaners.
Why This Works
Spanjaard Rapidkleen works by lowering the surface tension of oils and greases. Its low density (0.76 g/ml) allows the solvent to migrate into microscopic surface pores. In Malaysia’s tropical climate, the rapid evaporation rate is a critical performance factor; it ensures that the cleaning process is completed before atmospheric moisture can settle on the bare metal, which significantly reduces the risk of flash oxidation (rusting) during maintenance intervals.
Who This Is Suitable For / Not Suitable For
- Suitable For: MRO (Maintenance, Repair, and Overhaul) professionals, automotive technicians, and industrial plant engineers requiring a rapid, non-oily cleaning agent.
- Not Suitable For: Use on sensitive clear plastics (like polycarbonate), specific elastomers, or finished decorative paintwork without testing. It is not intended for use as a general-purpose household cleaner or on live electrical circuits.
How to Use
- Temperature Check: Ensure the component to be cleaned is at ambient temperature to prevent premature solvent flash-off.
- Preliminary Test: Apply a small amount to an inconspicuous area to verify compatibility with any nearby plastic or rubber seals.
- Application: Hold the canister 15-20 cm from the target and spray liberally to saturate the contaminants.
- Mechanical Aid: For heavy carbon or baked-on grease, use a stiff brush to agitate the surface while wet.
- Final Rinse: Apply a final spray to flush away the loosened grime.
- Drying: Allow to air dry for 30–60 seconds or wipe with a clean, lint-free microfiber cloth.
Common Mistakes to Avoid
- Over-spraying Near Seals: Prolonged exposure to the solvent can cause certain rubber seals to swell or lose elasticity.
- Inadequate Rinsing on Paint: Leaving the solvent on painted surfaces can soften the clear coat; always rinse immediately with water if accidental contact occurs.
- Ignition Hazards: Do not spray near open flames or grinding sparks, as the aerosol propellant and solvent are highly flammable.
- Wiping with Dirty Cloths: Re-contaminating the surface by using a rag that already contains oil or grease.
Safety & Compliance
The product is manufactured by an ISO 9001 certified company. It is classified as a hazardous chemical for storage and transport. It must be stored in a cool, well-ventilated area away from direct sunlight (typically below 50 Degree Celcius in Malaysian warehouse conditions). Users should wear nitrile gloves and safety goggles to prevent dermal absorption and eye irritation. It complies with industrial standards for metal cleaning solvents but requires disposal through licensed scheduled waste contractors (consistent with Environmental Quality Regulations).
FAQ
- Is Spanjaard Rapidkleen safe for all plastics? No. While safe for metal, it can attack certain plastics and rubbers. Always perform a spot test before broad application.
- How does this differ from standard soapy degreasers? Unlike water-based degreasers, Rapidkleen is a solvent that evaporates completely and does not require a water rinse, making it ideal for parts that cannot tolerate moisture.
- Can this be used as a contact cleaner for electronics? It is not recommended for sensitive electronics or energized equipment. Use a dedicated non-conductive contact cleaner for those applications.
- Does it remove silicone? It is effective at removing many types of silicone residues and oils, though mechanical agitation may be required for thick layers.
Stay connected with us
Visit our official Facebook page for the latest updates, check out our YouTube channel for exciting product demos, and explore the Davor website's News section for more insights.
Malaysia
