About JAINNHER JHU-2706HNC1
| ITEM | UNIT | JHU-2706HNC1 | |
| CAPACITY | Max. Work Swing | mm | 270 |
| Max. Grinding Length | mm | 600 | |
| Max. Grinding Dia | mm | 250 | |
| Max. Job Weight In Centers | kgs | 70 | |
| WORKHEAD | Speed Range | 60HZ | 11 ̴ 500 (Variable Speed) |
| Speed Range | 50HZ | 9 ̴ 420 (Variable Speed) | |
| Swivel Angle | 120° (CCW : 90° ; CW : 30°) | ||
| Center | MT4 | ||
| Spindle Rotation | Setting, Normal & Reverse Rotation | ||
| WORK TABLE | Horizontal Travel Speed | mm/min | 50 ̴ 40,000 |
| Handwheel / Revolution | mm | 20 | |
| Swivel Angle | CCW/CW | 11°/6° | |
| Min Travel | mm | 8 | |
| WHEELHEAD | Grinding Wheel Size | D x W x B | 405 x (25̴ 50) x 152.4 |
| Max. Peripheral | mm/min | 2,000 | |
| Grinding Wheel Speed | 60HZ | 1499 : 1600 (Standard) | |
| Grinding Wheel Speed | 50HZ | 1508 : 1603 (Standard) | |
| Total Front And Rear Travel | mm | Grinding Wheel 175 | |
| Speedy Feed Travel | H type 40mm / NC1 Type Adjustable Setting | ||
| Wheelhead Total Feed Travel | Grinding Wheel 135mm | ||
| Headwheel Feed / Revolution | mm | 1 | |
| TAILSTOCK | Center Travel | m/min | 30 |
| Center | MT4 | ||
| MOTOR | Grinding Wheel Motor | kW (HP) | 3.7 (5) |
| Workhead Motor | kW (HP) | 0.4 (1/2) | |
| Hydraulic Motor | kW (HP) | 1.5 (2) | |
| Compulsory Lubrication Motor | kW (HP) | 0.75 (1) | |
| Coolant Motor | kW (HP) | 0.2 (1/4) | |
| Magnetic Separator Motor | kW (HP) | 0.02 (1/25) | |
| Internal Grinding Motor | kW (HP) | 1.5 (2) | |
| X Servo Motor | kW | 1.5 | |
| HYDRAULIC SYSTEM | Hydraulic Tank | L | 60 |
| Compulsory Lubrication Tank | L | 30 | |
| Coolant Tank | L | 100 | |
| GENERAL | Machine Height | mm | 1,760 |
| Floor Space | mm | 2,620 x 2,090 | |
| Machine Weight | kgs(lbs) | 3,250 | |
| •Specification is subject to change without further notice. | |||
Malaysia
