40bar High Pressure Piston Air Compressor Oil Free High Pressure Piston Compressor

Description

Permanent magnet frequency conversion,energy saving selection

The perfect combination of inverter and inverter motor
DMG full series air compressor can be equipped with frequency converter to achieve optimal energy saving effect

• Adjust energy consumption by 20% through frequency converter
• Achieve constant pressure air, provide stable air source for users
• The balance starts, reduces the impact of the motor an the power grid, and extends the mechanicalvlife of the motor and the unit
• The frequency converter can be provided at random and can be upgraded later 

 

Permanent magnet synchronous motor scheme

DMG full series air compressor can be equipped with permanent magnet synchronous motor to further improve 
the energy saving effect

• Adopt refractory rare earth permanent magnet and never demagnetize
• Motor efficiency is 5% - 8% higher than ordinary motor, and more energy saving
• Can realize frequency conversion configuration function, and the frequency adjustment range is wide

 

High efficiency and energy saving dual - stage screw host

The double-stage screw compressor has the reasonable pressure ratio, ultra-small leskage and ultra-low noise.Make the 
compressed rotor and rotor of the secondary compression combination within a chassis, and through the direct drive for the front,
make every level of the rotor at runtime and matching the best linear velocity of gas production, and reasonable and can reduce
leakage in the compression, compression ratio under the same flow, two-stage compression than single stage compression energy saving 15% on average

 

Efficient water cooling syatem

Unit of lubricating oil, cylinder , packing all use through effcient cooler water cooling, effectively reduce the
temperature, the final exhaust temperature of generating units is not more than 130ºC, great extend valve piston
ring, packing, and other parts of life

• High efficiency cooler and interstage cooling technology,the waste heat generated by the unit is carried away,and the compressor compression cycle is the closest to isothermal compression.
• The installation of the unit is not affected in the harsh environment
• The heat exchange area is large and small, and under the same heat transfer capacity,the volume is only about 60% of the swirl cooler of the warped tube

The Eagle series four-steps compressed screw and oil-free air piston booster campressor

 

Model	Volume flow (Nm³/min)	Exhaust pressure (Mpa)	Installed power (KW)	Shaft power (KW)	Crankshaft Speed (rpm)	KG	water consumption(t/h)	Air oulet size	cooling water import and export of size	Dimensions (LxWxH)mm
LGV2-6.0/40PM	6.0	4.0	60	54	530	2500	20	DN40	1 1/2''	2790x1500x1470
LGV2-8.0/40PM	8.0	4.0	75	68	580	3000	25	DN40	1 1/2''	2790x1500x1470
LGV2-10/40PM	10	4.0	92	83	440	3500	30	DN40	1 1/2''	3100x1850x1760
LGV2-12/40PM	12	4.0	120	108	520	4000	40	DN40	1 1/2''	3100x1850x1760
LGV2-16/40PM	16	4.0	145	131	520	4500	50	DN50	2''	3520x2050x1760
LGW2-16/40PM	16	4.0	145	131	350	6000	50	DN50	2''	3520x2050x1760
LGW2-18/40PM	18	4.0	165	149	380	6500	50	DN50	2''	3820x2050x2100
LGW2-20/40PM	20	4.0	185	167	420	7000	60	DN50	2''	3820x2050x2100
LGW2-22/40PM	22	4.0	200	180	460	7500	60	DN50	2''	3820x2050x2100
LGW2-25/40PM	25	4.0	222	200	380	8000	80	DN50	3''	3820x2050x2100
LGW2-28/40PM	28	4.0	270	243	420	8500	100	DN65	3''	3820x2050x2100
LGW2-30/40PM	30	4.0	295	266	460	9000	125	DN65	3''	3820x2050x2100

Reference conditions : temperature : 20°c suction pressure : 1 bar (abs) relative humidity : 0%
Standard constraints : height : 1000 m standard equipment : highest temperature 40°c standard options : 
The Company's products continue to improve, to retain right of design change.Parameters change, without prior notice.

More detail about DMG KOMPRESSOREN (SEA) SDN BHD