详情

Sika AnchorFix® S

Universal anchoring adhesive

Styrenated polyester based 2-component anchoring adhesive.

Fast curing
Non-sag, even overhead
ETA for anchoring in uncracked concrete

Usage

As a fast curing anchoring adhesive for all grades of:

Rebars / reinforcing steel
Threaded rods
Bolts and special fastening systems

In the following substrates:

Concrete
Hollow and solid masonry
Hard natural stone^*
Solid rock^*

* These substrates may vary greatly, in particular with regard to strength, composition and porosity. Therefore, for each application the suitability of Sika Sika AnchorFix® S adhesive must be tested by first applying the Product only to a sample area. Check in particular bond strength, surface staining and discolouration.

Advantages

Fast curing
Non-sag, even overhead
ETA for anchoring in uncracked concrete
Low wastage

Packaging

300 ml standard cartridge	12 cartridges per box
	pallet: 75 boxes

Colour

Component A:	white
Component B:	black
Component A+B mixed:	light grey

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

CE marking and Declaration of Performance as Bonded injection type anchor for use in uncracked concrete according to EAD 330499-00-0601, based on ETA-13/0721 of 18/05/2018 and certificate of constancy of performance of the construction product issued by notified product certification body.

Product Information

Technical Information

Application

Application Information

Mixing Ratio

Component A : component B = 10 : 1 by volume

Layer Thickness

3 mm max.

Sag Flow

Non-sag, even overhead

Product Temperature

Sika AnchorFix® S must be at a temperature of between +5 °C and +40 °C for application.

Ambient Air Temperature

+5 °C min. / +40 °C max.

Dew Point

Beware of condensation.
Substrate temperature during application must be at least 3 °C above dew point.

Substrate Temperature

+5 °C min. / +40 °C max.

Curing Time

Temperature	Open time - T_gel	Curing time - T_cur
+40 °C	1.5 minutes	10 minutes
+35 °C – +40 °C	1.5 minutes	15 minutes
+30 °C – +35 °C	2 minutes	20 minutes
+25 °C – +30 °C	3 minutes	30 minutes
+20 °C – +25 °C	4 minutes	40 minutes
+10 °C – +20 °C	6 minutes	80 minutes
+5 °C – +10°C	12 minutes	120 minute
+5 °C*	18 minutes	120 minutes

*Minimum cartridge temperature: +5 °C