详情

Schneider Electric PowerLogic PM5000 Series

PowerLogic PM5000 Series Power Meters

Schneider Electric PowerLogic PM5000 Series meters are high-performance, cost-effective power and energy meters for LV and MV electrical monitoring applications. The range supports panel metering, sub-metering, basic power quality visibility, demand monitoring, alarming, data logging and energy management system integration.

The PM5000 family includes PM5100, PM5300, PM5500, PM5600 and PM5700 series models, with options for RS485, Ethernet, Class 0.5S or Class 0.2S energy accuracy, harmonics up to 15th, 31st or 63rd order, digital I/O, relay outputs, data logging and remote display configurations.

Metering Range PM5100 / PM5300 / PM5500 / PM5600 / PM5700

Accuracy Options Class 0.5S and Class 0.2S models

Power Quality THD, TDD and harmonics up to 63rd order

Integration RS485, Ethernet, EMS, BMS, SCADA and IoTWatt 4.0

Product Overview

The PowerLogic PM5000 Series is designed for electrical distribution monitoring, energy visibility and basic power quality analysis. It allows facility, energy and electrical teams to monitor current, voltage, power, power factor, energy, demand, unbalance, harmonics, alarms and historical logs depending on the selected model.

The range is suitable for LV and MV systems, including main incomers, sub-main feeders, MCC panels, distribution boards, tenant metering, utility metering points, production areas and critical electrical loads. The PM5000 Series also supports IEC 61557-12 performance-based metering requirements, allowing meter readings to be more comparable when connected under the same conditions.

Positioning: PowerLogic PM5000 Series meters are suitable for basic multi-function metering, energy monitoring, demand management, power factor review, basic power quality visibility, sub-metering and IoTWatt 4.0 integration.

Typical Monitoring Architecture

PM5000 meters are installed at the electrical panel and communicate through RS485 or Ethernet, depending on the selected model. Meter data can be collected by EMS, BMS, SCADA, EcoStruxure Power Monitoring Expert, IoTWatt 4.0 or other Modbus-based monitoring systems.

1 CT / Voltage Inputs

2 PM5000 Meter

3 RS485 / Ethernet

4 Meter Data + Alarms

5 EMS / BMS / IoTWatt

Key Features

Multi-Function Metering

Measures voltage, current, frequency, active power, reactive power, apparent power, power factor, energy and demand values.

Class 0.5S / 0.2S Accuracy

PM5100 and PM5300 models support Class 0.5S active energy, while higher PM5500, PM5600 and PM5700 models support Class 0.2S active energy.

Power Quality Visibility

Supports THD, TDD and individual harmonic visibility depending on model, helping identify distortion from nonlinear loads.

Demand Monitoring

Tracks demand values with timestamping for load management, peak demand review and capacity planning.

Alarming with Timestamp

Supports setpoint-driven alarms and digital alarms, helping users identify abnormal electrical conditions.

Data Logging

Supports energy, demand, min/max, alarm and event logs depending on the selected PM5000 model.

Digital I/O and Relay Options

Available options include digital inputs, digital outputs and relay outputs for pulse, status, alarm and control-related functions.

RS485 and Ethernet Models

Choose RS485 Modbus models or Ethernet-enabled models depending on the site communication architecture.

IoTWatt 4.0 Ready

PM5000 meter data can be used for dashboards, alarms, energy analytics, EECA reports and digital energy audit workflows.

PM5000 Series Model Positioning

Series	Typical Positioning	Accuracy	Harmonic Visibility	Communication / I/O Notes
PM5100 Series	Basic multi-function panel metering	Class 0.5S active energy	Up to 15th harmonic for selected models	Pulse or RS485 model options depending on reference
PM5300 Series	Enhanced metering with stronger logging, I/O and 31st harmonic visibility	Class 0.5S active energy	Up to 31st harmonic	RS485 or Ethernet models; 2DI / 2DO; relay models available
PM5500 / PM5600 / PM5700 Series	Higher-accuracy advanced power monitoring for important feeders and main metering points	Class 0.2S active energy	Up to 63rd harmonic	RS485 and Ethernet models; larger memory; 4DI / 2DO for selected models
PM5563	DIN rail advanced meter for compact metering cabinets and no-display installations	Class 0.2S active energy	Up to 63rd harmonic	DIN mount, no display, RS485 and Ethernet

Power Quality and Network Visibility

PM5000 meters provide basic power quality visibility for electrical networks. Depending on model, the meters support total harmonic distortion, total demand distortion, individual harmonics, unbalance, min/max readings, demand values, alarm logs and event logs.

Power Quality Function	Purpose	Typical Benefit
THD / thd	Monitors voltage and current harmonic distortion.	Helps identify distortion from VSDs, UPS systems, rectifiers and nonlinear loads.
Individual Harmonics	Provides harmonic order visibility up to 15th, 31st or 63rd depending on model.	Supports better troubleshooting of harmonic sources and affected equipment.
TDD	Tracks total demand distortion for current distortion review.	Useful for electrical quality and IEEE-style harmonic review workflows.
Unbalance	Monitors voltage and current unbalance.	Helps detect phase loading issues that may affect motors, transformers and panels.
Min / Max with Timestamp	Records when important parameters reach minimum and maximum values.	Supports maintenance, load review and troubleshooting.
Alarms	Setpoint and digital alarms notify abnormal electrical conditions.	Improves operating visibility and response to network issues.

Applications

Main Incomer Monitoring

Use higher-accuracy PM5500 / PM5600 models at main incomers and important feeders.

Sub-Metering

Measure energy by tenant, department, production line, feeder, process area or equipment group.

Demand Management

Track peak demand, predicted demand and demand trends to support load management.

Power Factor Review

Monitor true power factor, displacement power factor and reactive power for capacitor bank review.

Harmonic Review

Use THD, TDD and individual harmonics to identify distortion from nonlinear loads.

WAGES Monitoring

Use available inputs to integrate third-party water, air, gas, electricity or steam meter pulses where supported.

EMS / BMS / SCADA

Integrate PM5000 meter data into facility and industrial monitoring systems through RS485 or Ethernet.

IoTWatt 4.0

Use PM5000 data for dashboards, alarms, analytics, savings verification and digital energy audit reports.

EECA Reporting Support

Use metered data to support energy performance monitoring and regulatory reporting workflows.

Typical Measured Parameters

Parameter Group	Typical Measurements
Voltage	Phase-to-phase, phase-to-neutral and average voltage values depending on wiring configuration.
Current	Phase current, average current and neutral / ground current monitoring on selected models.
Power	Active, reactive and apparent power, total and per phase, signed four-quadrant measurement.
Energy	Active, reactive and apparent energy, received / delivered, net / absolute and time counters.
Power Factor	True power factor and displacement power factor, total and per phase.
Demand	Present, last, predicted and peak demand with date and time stamping.
Power Quality	THD, TDD, harmonics, unbalance and sag / swell functions on selected higher models.
Logs and Alarms	Min / max log, data logging, maintenance log, alarm log and event log depending on model.

Integration with IoTWatt 4.0

IoTWatt 4.0 can collect PM5000 meter data through RS485 Modbus, Ethernet Modbus TCP or a suitable gateway depending on the selected model. The collected data can be used for continuous energy monitoring, digital energy audit, EECA reporting, demand analytics and savings verification.

Monitor kWh, kW, current, voltage, power factor, demand and harmonic data.
Build energy baselines and compare energy performance over time.
Identify abnormal loads, demand peaks, poor power factor and high harmonic distortion.
Use meter data for equipment-level and plant-level digital energy audit workflows.
Generate dashboards, alarms, trend reports and energy performance summaries.
Support EECA reporting and continuous energy performance improvement.

Integration note: RS485 PM5000 models can be connected through compatible gateways such as RS2LAN, RS2MQTT or RS2WLAN. Ethernet-enabled PM5000 models can be connected through the site LAN where network access is available.

Model Selection Guide

Requirement	Recommended PM5000 Direction
Basic power and energy monitoring	PM5100 / PM5110 type models.
RS485 Modbus integration	Select RS485-enabled PM5000 models such as PM5110, PM5310, PM5330 or PM5560.
Ethernet integration	Select Ethernet-enabled models such as PM5320, PM5340, PM5560 or PM5563.
Cost allocation with better accuracy	Use Class 0.5S or Class 0.2S models depending on metering importance.
Higher-accuracy important feeders	Use PM5500 / PM5600 / PM5700 family models with Class 0.2S active energy accuracy.
Harmonic visibility	Use PM5300 for up to 31st harmonic or PM5500 / PM5600 / PM5700 family for up to 63rd harmonic.
DIN rail installation	Use PM5563 or other DIN-mount references where panel-front display is not required.
Local relay output functions	Select PM5330 / PM5340 type models where relay output is required.

Recommended Deployment Checklist

Confirm metering objective: basic metering, sub-metering, cost allocation, demand management or power quality visibility.
Confirm required accuracy class: Class 0.5S or Class 0.2S.
Confirm communication method: pulse, RS485, Ethernet or gateway-based integration.
Confirm required harmonic visibility: 15th, 31st or 63rd order.
Confirm panel mounting requirement: 96 mm × 96 mm flush mount or DIN rail model.
Confirm CT ratio, CT class, CT burden, CT secondary rating and wiring configuration.
Confirm control power availability and voltage rating.
Confirm digital inputs, outputs, relay outputs or WAGES monitoring requirements.
Confirm EMS, BMS, SCADA, EcoStruxure PME or IoTWatt 4.0 integration requirements.
Test voltage phase sequence, CT polarity, communication, readings, alarms and logs during commissioning.

PowerLogic PM5000 Supply, Commissioning and IoTWatt 4.0 Integration

Saturn Pyro supports Schneider Electric PowerLogic PM5000 Series meters for LV and MV electrical monitoring, sub-metering, demand monitoring, power factor review, harmonic visibility, EMS / BMS / SCADA integration and IoTWatt 4.0 digital energy audit projects in Malaysia.

Enquire Now

更多 Saturn Pyro Sdn Bhd 相关资料