The Imada Load Cells, also known as “Load Transducers” or “Load Sensors” are sensor that detects force or torque and converts its magnitude into an electrical signal. Presented by MSP Metrology (M) Sdn Bhd from Imada Japan.
.jpg "TLC 1")
High-capacity tension load cell carries waterproof and dustproof protection class IP67 (Ingress Protection 67 Ratings), with capacity of 20kN. With two rods included, it attaches a sample to the rod ends and measure the tension force.
Ideal for high capacity tension testing as it is easy to hang a sample by a shaft
Enables measurement applications in dusty or wet environment due to IP67 approval
Separated sensor model force gauges with a dedicated sensor available for a certain measurement purpose
eZ-Connect series (interchangeable sensors for using with one amplifier eZT) available for a wide range of testing
| Model | Capacity |
| ZU-10kN | 10kN |
| ZU-20kN | 20kN |
| Capacity | 10kN ~ 20kN |
| Accuracy | ±1.0%F.S. or less |
| Size | Approx. ∅30 x H210~ ∅39 x H234mm |
| Cable Length | Approx. 5m |
Load cells for tension with hook attached and can be used as a crane scale. They are lightweight but with capacity of 10kN.
Ideal for high capacity tension testing as it is easy to hang a sample through the hook
Enables measurement applications in dusty or wet environment due to IP67 approval
Separated sensor model force gauges with a dedicated sensor available for a certain measurement purpose
eZ-Connect series (interchangeable sensors for using with one amplifier eZT) available for a wide range of testing
| Model | Capacity |
| ZW1-10kN | 10kN |
| Capacity | 10kN |
| Accuracy | ±1.0%F.S. or less |
| Size | Approx. W79 x L250mm |
| Cable Length | Approx. 0.5 ~ 2m (Curl cable) |
Contact us today to inquire about the Imada Tension Load Cells Series and enhance your tension measurement capabilities.
Malaysia
