详情
IMITOS 24V LED Power Supply 60W GMR 60W-24V Slim Driver
The IMITOS LED Power Supply 60W (Model: GMR 60W-24V) is a highly reliable, constant voltage 24V DC driver engineered specifically for modern LED strips and low-voltage lighting installations across Malaysia. Operating on a wide input voltage range (175-265V) and outputting a stable 2.5A at 24V, this premium power supply guarantees flick-free illumination, enhanced device safety, and optimal energy efficiency. Its ultra-slim, space-saving dimensions (118 × 50 × 23mm) make it the perfect option for hidden cove light setups, custom cabinetry lighting, and aesthetic commercial interior designs.
Full Description:
Upgrading your residential or commercial lighting requires reliable components that prevent premature bulb failure or annoying flickering. The IMITOS LED Power Supply 60W - GMR 60W-24V is a professional-grade power converter built to meet the rigorous demands of modern interior lighting setups. Whether you are executing a minimalist home renovation in Kuala Lumpur or setting up ambient retail displays in Penang, this high-performance LED driver provides a stable bridge between standard Malaysian grid electricity and your sensitive low-voltage LED strip lighting.
Engineered for Safety and Stability
Electrical fluctuations are a common issue that can degrade electronic components over time. The IMITOS GMR 60W-24V is engineered with a wide industrial input tolerance range of 175-265V alternating current (AC) at a standard frequency of 50/60Hz. This safeguard ensures that unexpected grid sags or surges will not interrupt your lighting experience.On the output side, it cleanly converts incoming currents into a reliable 24V direct current (DC) at a continuous 2.5A output current rating. Delivering a constant voltage keeps your LED modules running cool, maintains uniform brightness from the start to the end of your strip run, and prevents premature lumen depreciation.
Ultra-Slim, Space-Saving Design
Modern interior architectural trends focus on invisible fixtures and clean aesthetics. Bulkier, old-school transformers are incredibly difficult to hide behind ceiling corners or tight cabinet grooves. The IMITOS GMR 60W-24V addresses this challenge directly with its compact housing dimensions:
- Length: 118mm
- Width: 50mm
- Height: 23mm
Thanks to this ultra-slim profile, electrical installers can comfortably slip this module into tiny drywall ceiling plaster pockets, behind valances, inside thin signage boards, or within modular cabinet panel slots without sacrificing architectural beauty.
Versatile Malaysian Indoor Applications
The 24V system architecture has quickly become the local industry benchmark over older 12V configurations due to its lower voltage drop over long wire lengths. The IMITOS 60W unit is exceptionally flexible and perfectly suited for a wide array of lighting profiles, including:
-
Plaster Ceiling Cove Lights: Elevate your living rooms and master bedrooms with seamless, indirect ambient glows.
-
Under-Cabinet & Wardrobe Lighting: Brighten up kitchen countertops and closets with precise accent light paths.
-
Display Showcase Systems: Illuminate premium retail goods, jewelry displays, or collectible cabinets safely.
-
Commercial Signage: Power high-visibility indoor corporate logos or menu light boxes efficiently.
Specification:
-
Model: GMR 60W-24V
- Rate Power: 60W
- Input Voltage: 175-265V~50/60Hz
- Output Voltage: 2.5A/24V
- Size: 118*50*23mm
Q1: Can I use the IMITOS GMR 60W-24V power supply for a 12V LED strip light?
A: No, you cannot. This model outputs a constant 24V DC. Connecting it to a 12V LED strip will immediately overload, burn out, and permanently damage the LEDs. Always match the voltage of your power supply exactly to your LED strip specifications.
Q2: What is the maximum length of 24V LED strip I can connect to this 60W power supply?
A: It depends entirely on the wattage rating per meter of your specific LED strip. For instance, if your 24V LED Strip uses 10W per meter, you can safely connect up to 4.8 meters of strip, applying the standard 80% safety headroom rule (60W × 0.8 = 48W).
Q3: Why is the 80% power rule recommended for LED drivers like the IMITOS 60W?
A: Running any power supply at 100% maximum capacity continuously generates excess heat and reduces its overall lifespan. Limiting the continuous load to 80% (48W maximum load for this 60W model) ensures cooler operation, safety stability, and long-term durability.
Q4: Does the IMITOS GMR 60W-24V power supply prevent LED light flickering?
A: Yes, it does. Flickering is usually caused by unstable AC current or sub-par transformers. The IMITOS driver regulates volatile 175-265V grid power into a smooth, ripple-free 24V DC current to give you smooth, flick-free illumination.
Q5: Is this 24V LED driver small enough to fit inside a standard Malaysian plaster ceiling plaster box?
A: Yes, with a compact size of only 118 × 50 × 23mm, it features an ultra-slim design engineered precisely to fit into tight ceiling recesses, narrow aluminum tracks, or small cabinetry voids.
Q6: What does the 175-265V input specification mean for local users?
A: This indicates that the unit is engineered to work perfectly with Malaysia's standard 230V electrical grid. It also protects your lights during minor voltage sags or surges by maintaining a flat, stable output.
Q7: Can I install this IMITOS 60W power supply outside for garden lighting?
A: No, the IMITOS GMR 60W-24V is an indoor-rated power supply. It should not be exposed to water, rain, or heavy condensation. For outdoor landscape lighting, you must install it inside an IP65+ weatherproof enclosure.
Q8: What happens if my LED strip draws more than 2.5A from this driver?
A: If your lighting array attempts to pull more than 2.5A (exceeding 60W), the power supply may overheat, activate its built-in safety shutdown mechanism, or flicker rapidly. Reduce the total load immediately to fix this issue.
Q9: Is the IMITOS GMR 60W-24V compatible with smart home dimmer switches?
A: This unit is a non-dimmable constant voltage power supply. If you want a smart dimming setup, you must connect a compatible 24V smart LED controller (like Tuya, Zigbee, or Bluetooth modules)
after the power supply's output line, rather than dimming the AC side.
Q10: Why should I choose a 24V system over a 12V system for home renovation?
A: 24V systems run at half the current (amperage) of 12V systems for the exact same wattage. This dramatically reduces voltage drop, meaning your LED strips will stay uniformly bright over longer distances without dimming at the far end.
更多 E S L Lighting (M) Sdn Bhd 相关资料
Malaysia
