KTH Wall Sealer 1000 is a water-based wall sealer for both interior and exterior walls, formulated with special acrylic polymer to provide excellent efflorescence resistance, outstanding alkaline resistance, good adhesion, and strong anti-fungus and algae resistance.
Helps protect wall surfaces from alkaline effects before applying the finishing paint coat.
Supports stronger paint bonding on masonry, brick, plastering substrate, and fibre board surfaces.
Helps improve long-term wall protection for interior and exterior painting projects.
KTH Wall Sealer 1000 is suitable for projects that require better paint performance, stable wall preparation, and cleaner finishing results.
Designed as a practical water-based sealer for both residential and commercial painting applications.
Provides a suitable base coating finish before applying interior or exterior wall paint.
Helps reduce uneven absorption and supports a smoother, more consistent final wall finish.
KTH Wall Sealer 1000 is a water-borne sealer for both interior and exterior walls. It is formulated with special acrylic polymer for excellent efflorescence resistance and strong wall surface preparation.
This wall sealer is commonly used by contractors, painters, renovation specialists, developers, and homeowners for residential and commercial painting projects.
| Product Detail | Description |
|---|---|
| Paint Type | Water based |
| Product Type | Interior and exterior wall sealer |
| Finishing | Low sheen |
| Recommended Substrate | Masonry, brick, plastering substrate, and fibre board |
| Key Features | Excellent efflorescence resistance, outstanding alkaline resistance, good adhesion, anti-fungus and algae resistance |
| Main Benefit | Improves paint adhesion and supports smoother wall finishing results |
| Composition | Titanium dioxide and mineral extender pigment, styrene acrylic emulsion binder, and water thinner |
| Density | 1.50 - 1.80 |
| Viscosity | 80 ± 10 KU at 30°C |
| Colour | White |
| Coverage | 7 - 10 m² per litre; theoretical coverage 10 - 12 m² per litre per coat, depending on substrate condition, application method, application condition, and finishing appearance |
| Drying Time | Touch dry 15 - 30 minutes; hard dry 30 - 60 minutes, depending on temperature and humidity |
| Recoating Time | Approximately 2 hours, depending on temperature and humidity |
| Dry Film Thickness | Around 30μm per coat, based on substrate condition |
| Recommended Coating System | Sealer / Primer: KTH Wall Sealer 1000 - 1 coat; Top Coat: KTH Emulsion Paint - 2 coats |
| Application Method | Brush, roller, and spray application; stir mixture thoroughly before use |
| Packaging Size | 5-Litre and 18-Litre |
| Shelf Life | Up to 36 months in tightly sealed container |
| SDS Safety Status | Mixture not classified as hazardous; ensure good ventilation during application and drying |
KTH Wall Sealer 1000 is suitable for painting and wall preparation projects that require better paint support and surface consistency.
Proper wall preparation helps improve paint adhesion and coating performance.
Ensure the wall surface is dry, clean, and free from dust, grease, loose particles, and unstable coating.
Sand uneven areas and repair holes where needed before applying the sealer coat.
Let the sealer dry properly before applying the finishing paint coat for better results.
Contact us now to get more information about KTH Wall Sealer 1000 for residential, commercial, renovation, and construction painting projects.
Malaysia
