Colourland Colour Plus is an interior emulsion paint designed to give walls a beautiful smooth matt finish with good opacity, good coverage, low odour, low VOC, and long-lasting durability for indoor spaces.
Creates a clean and beautiful matt wall finish suitable for modern interior spaces.
Helps cover wall surfaces effectively while giving rooms a fresh and consistent colour appearance.
The low odour and low VOC formula makes it a practical choice for interior repainting and renovation work.
Colourland Colour Plus is a practical interior wall paint for projects that need smooth finishing, good coverage, fresh colour, and a durable decorative coating for indoor masonry surfaces and soft wall boards.
Designed for normal interior masonry surfaces and soft wall boards in homes, offices, shops, and commercial spaces.
Provides a long-lasting decorative finish that helps indoor spaces look brighter, cleaner, and more comfortable.
Colourland Colour Plus is listed as a SIRIM ECO-LABEL product, making it suitable for users looking for a more responsible interior paint choice.
Colourland Colour Plus is designed to give a beautiful smooth matt wall finish with good opacity and coverage. It is suitable for normal interior masonry surfaces and soft wall boards.
This interior emulsion paint is suitable for homeowners, painters, contractors, and property managers who need a practical paint solution for indoor wall decoration, repainting, and renovation projects.
| Product Detail | Description |
|---|---|
| Paint Type | Interior emulsion wall paint |
| Finish Type | Smooth matt finish |
| Suitable Surfaces | Normal interior masonry surfaces and soft wall boards |
| Recommended Coats | 2 coats |
| Key Features | Good coverage, good opacity, low odour, low VOC, good durability, and SIRIM ECO-LABEL |
| Best For | Homes, offices, shops, rental units, repainting, and renovation projects |
| Main Benefit | Fresh interior colour with smooth matt coverage and long-lasting decorative effect |
| Product Name | Colourland Colour Plus |
| Paint Type | Water based interior emulsion paint |
| Finish | Matt finish |
| Pack Size | 1, 5 and 18 litres |
| Colour Range | Refer to Colourland colour catalogue |
| Suitable Masonry Surfaces | Normal interior wall masonry surfaces including brickwork, plaster, cement and wallboards |
| Performance Guide | Will tolerate atmospheric humidity in normal interior environments and can withstand moderate washing; not suitable where frequent heavy condensation is likely to occur, such as kitchens and bathrooms |
| Composition | Lightfast non-lead pigments and mineral extenders, acrylic copolymer binder, and water solvent |
| Volume Solids | White 40% nominal; other colours will vary |
| Theoretical Coverage | Approximately 10 - 12 m²/litre under normal conditions |
| Film Thickness | Single coat at standard thickness: 30 - 40 microns |
| Drying Time | Touch dry depends on temperature and humidity; recoat after 2 - 3 hours |
| Thinning | Brush or roller normally does not require thinning; if required, add up to 10% clean water. Conventional spray may be thinned up to 30%; airless spray is usually ready for use. |
| Recommended System | Powdery surfaces: Colourland High Performance Sealer. Alkaline/new surfaces: Colourland High Performance Sealer + Colourland Colour Plus. Normal sound surfaces: Colourland Wall Sealer 9000 + Colourland Colour Plus. |
| Surface Preparation | Surface must be sound, clean, dry and free from defective or poorly adhering material, dirt, grease or wax; rub down with suitable abrasive paper and dust off before painting |
Colourland Colour Plus is suitable for interior painting projects where wall appearance, room freshness, and practical coverage are important.
Contact us now to choose the right Colourland Colour Plus paint colour, quantity, and interior painting solution for your home, office, shop, or renovation project.
Malaysia
