| Model |
MTHG-072 |
MTHG-162 |
| Inner chamber size(cm) |
45×40×40 |
60×45×60 |
| Exterior chamber size (cm) |
100x200x170 |
120x215x185 |
| Testing temperature range |
-70℃，-60℃, -40℃, -20℃, 0℃~150℃，other temperature can be customized |
| Testing humidity range |
20%RH～98%RH(low humidity10%RH～98%RH或5%RH～98%RH can be customized) |
| Temp.humi.fluctuation |
±0.3℃；±0.5%RH |
| Temp.humi.uniformity |
±1.5℃；±3%RH (empty loading after stabilizing for 30 mins) |
| Temp.humi.resolution |
0.01℃；0.1%RH |
| Heating&cooling time ℃/min |
Heat-up:3℃/min(average),cool-down:1℃/min(average) |
| Exterior chamber material |
Cold-rolled plate + Powder coating |
| Interior chamber material |
SUS#304 Stainless steel |
| Insulation material |
PU+ fiberglass wool |
| Circulation system |
Centrifugal fan air circulation system |
| Heating system |
SUS# Stainless steel high-speed heater |
| Humidification system |
Electrothermal steam humidification |
| Dehumidifying |
ADP critical dew point cooling / dehumidifying method |
| Refrigeration system |
Compressor + Finned evaporator + Air(Water) cooled condenser |
| Controlling system |
Touch screen controller+SSR+PID |
| Other components |
Vacuum glass observation window |
| Test hole (50mm) |
| Control status indicator |
| Interior light |
| Compartment shelf (2 freely adjustable) |
| Safety protection device |
Humidification system overheat protection |
| Compressor overload protection |
| Control system overload protection |
| Overload indicator |
| Phase sequence protection |
| Water shortage protection |
| High voltage and low voltage protection |
| Over-temperature protection |
| Water supply delay protection |
| Fan overcurrent protection |
| Power supply |
AC 1Ψ 220V; 3Ψ380V 60/50Hz |
| Customization service |
Non-standard or special requirements are all welcome |
Malaysia
