Rooftop Exhaust Hoods

Rooftop Exhaust Hoods | High-Velocity Air Terminals by EKG

In the commercial and industrial landscape of Kuala Lumpur, Rooftop Exhaust Hoods (also known as discharge cowls or mushroom exhausters) are the final exit point for a building's stale air, heat, and contaminants. Unlike passive vents, these hoods are typically engineered to handle the high-velocity discharge from Axial fans or Centrifugal blowers. In 2026, many KL rooftops are suffering from "Exit Turbulence"—where poorly maintained or undersized hoods create a "Back-Pressure" bottleneck that causes fan motors to overheat and electricity bills to spike.

As part of a Ventilation Systems Audit, EKG provides the aerodynamic restoration and structural reinforcement needed to ensure your building's exhaust path is 100% "friction-free."

1. The Physics of "Discharge Efficiency"

A rooftop exhaust hood must balance high-volume air release with total environmental protection:

• The Static Pressure Penalty ($P_s$): Every turn or baffle inside the hood creates resistance. If the hood is "choked" with soot or has a dented skin, the static pressure rises, forcing the fan to draw more Amperage ($A$) to move the same volume of air.

• Vertical vs. Horizontal Discharge: We audit your hood's discharge direction. Vertical Discharge Hoods are critical for kitchen or industrial fumes to ensure contaminants are shot high into the air, preventing them from being "re-entrained" back into your fresh air intakes.

• Velocity Recovery: High-performance hoods use a flared "Venturi" throat to convert air velocity into pressure, helping the fan motor run more efficiently.

2. The EKG "Total-Flow" Audit Protocol

We treat rooftop hoods as dynamic mechanical terminals that directly impact your fan's lifespan:

• Internal "Soot-Paste" De-Scaling: In KL’s smoggy environment, oil mist and moisture form a sticky crust inside the hood. A 5mm buildup can increase air friction by 20%. We perform deep chemical cleaning to restore a "Slick" internal surface.

• Bird & Debris Screen Restoration: We replace rusted galvanized mesh with high-flow 316 Stainless Steel screens. A clogged screen is the #1 cause of "Motor Trip" faults in rooftop ventilation units.

• Vibration & Structural Stays Audit: Because hoods are "Top-Heavy," they are prone to vibration fatigue. We ensure the Structural Stays and base bolts are torque-set to prevent the hood from tearing your roof sheets during a tropical storm.

• Marine-Grade Poly-Hybrid Sealing: We inspect the "Curb" connection. We use High-Build Polyurethanes to ensure the base remains water-tight during the extreme thermal expansion of the KL sun.

3. The Energy & Operational Impact: The Cube Law

The aerodynamic health of your exhaust hood is the primary "bottleneck" for your Variable Frequency Drives (VFDs).

• Reducing "Back-Pressure": A clean, smooth hood lowers the resistance the fan must fight.

• The Logic: By "Un-choking" the exhaust hood, we lower the total static resistance of the system. This allows the fan to hit its target Air Changes per Hour (ACH) at a lower frequency (Hz).

Because of the Cube Law, reducing the "Exit Resistance" so the fan can run 10% slower reduces your daily mechanical energy consumption by nearly 30%.

4. Rooftop Exhaust Hood Health Matrix

5. Why Trust EKG for Exhaust Hoods?

• Building Envelope Expertise: We don't just look at the fan; we look at how the hood interacts with your roof structure and thermal load.

• Mechanical Restoration Path: If your hoods are undersized or corroded, we are experts in Mechanical Fan Overhauls, offering custom-fabricated replacement hoods in heavy-gauge G.I. or aluminum.

• VFD-Energy ROI Projection: We calculate the TNB savings achieved by "Slicking" your building’s exhaust path to reduce fan motor drag.

• 2026 KL Ready: We use only non-corrosive, marine-grade materials designed for the high acidity and humidity of urban Malaysia.