|
Product Summary |
|
|
Fine ovens with a maximum working temperature of 500℃. |
|
|
|
|
Features |
|
|
Maximum operation temperature 500℃ |
|
Easy operation, available for fixed temp., program, quick auto stop, auto stop and auto start operations. |
|
Digital setting through special function menu keys and ▲/▼ keys. Programmable controller with 3 modes. |
|
Overheating protection, deviation correction and key locking through submenu keys. |
|
Quick exhaust and cooling through exhaust dampers |
|
Safety·Self-diagnostic circuit (temperature sensor anomaly, heater disconnection protection, automatic overheating preventer, SSR short-circuit protection), independent overheating preventer, overcurrent leakage protection, key lock and other safety functions. |
|
|
|
|
|
|
|
Specifications |
|
|
Specification Item |
Details |
|
Model |
DH650C |
|
System |
Forced convection and ventilation |
|
Operating temperature range |
Room temp.+10~500℃ |
|
Temperature deviation |
±1.5℃（at 100℃), ±2℃（at 200℃), ±3℃（at 300℃), ±5℃（at 400℃), ±6℃（at 500℃) |
|
Temp. adjustment accuracy |
±0.2℃（at 300℃), ±0.5℃（at 500℃) |
|
Temp. distribution accuracy |
±3.0℃（at 300℃), ±5.0℃（at 500℃) |
|
Max. temp. reaching time |
Approx. 60 min (to 500℃) |
|
Composition Interior material |
Stainless steel plate |
|
Exterior material |
Cold rolled steel plate with chemical proofing coating |
|
Insulating material |
Aluminum silicate wool, ceramic fiber blocks, insulation blocks |
|
Heater |
Alloy heating wire 7.8KW |
|
Fan blade/motor |
Axial flow fan blades, self-cooling high-temperature motor 20w |
|
Exhaust port / test hole |
Inner diameter 50mm, located at the back side / inner diameter 30mm, located at the back side |
|
Other additional mechanisms |
Exhaust dampers (manual) |
|
Controllers Temp. control method |
3-stage PID |
|
Temperature setting method |
Digital setting through special function menu keys and up/down keys to realize |
|
Setting temp. display |
Red 4-digit LED digital display |
|
Timer |
1 min ~ 99 h 59 min and 100~999 h 50 min (including timer waiting function) |
|
Operation functions |
Fixed temp. operation, auto start, auto stop, program operation |
|
Program mode |
Program operation 6 modes with a total of 90 segments (30 segments×1, 15 steps×2, 10 segments×3) |
|
Additional functions |
Deviation correction, key lock, power failure compensation |
|
Heater circuit control |
SSR drive |
|
Sensors |
K thermocouple (Temp. controller and overheat protector) |
|
Safety device |
Self-diagnostic circuit (temperature sensor anomaly, heater disconnection protection, automatic overheating preventer, SSR short-circuit), overheating preventer, overcurrent leakage protection, key lock functions |
|
Internal dimensions(W ×D× H mm) |
600×600×600 |
|
External dimensions (W ×D× H mm) |
1350×950×1300 |
|
Internal capacity |
216L |
|
Shelf load |
30kg/ layer |
|
Shelf layers / shelf support spacing |
9 layers/ 60mm |
|
Power Source |
3 phase AC380V 12.5A |
|
Weight |
Approx. 250kg |
Malaysia
