CUSTOM Digital Multimeter CDM-35

A handy size that can fit in the pocket of your work clothes. A basic model that is easy to use and equipped with basic functions.

• Comes with a backlight function that allows you to check measurement results even in dark places.
• Supports overvoltage category CAT III 600V. Can measure primary circuits from distribution boards to devices and outlets.
• Handy size that fits in one hand.

Part names

• ① Liquid crystal display section
• ② Backlight button
• ③ Function dial
• ④ Test lead (mA/μA) terminal
• ⑤ Test lead (COM) terminal
• ⑥ Test lead (V/Ω/diode/continuity) terminal
• ⑦ SEL button (SEL)
• ⑧ Stand
• ⑨ Battery cover
• ⑩ Probe cover
• $j Barrier part of test lead
• $k Test leads

▲Back to top of page

specification

Electrical Performance

	range	resolution	Accuracy	remarks
ACV *3	2 V	0.001 V	±(1.2% + 5 dgt)	Input impedance 10 MΩ 40 Hz to 400 Hz *3 Accuracy is guaranteed to be 0.1V or higher.
	20 V	0.01 V
	200 V	0.1 V
	750 V	1 V	±(1.5% + 5 dgt)
DCV	200 mV	0.1 mV	±(0.8% + 5 dgt)	Input impedance 10 MΩ
	2 V	0.001 V
	20 V	0.01 V
	200 V	0.1 V	±(1.0% + 8 dgt)
	1000 V	1 V
ACA	200 μA	0.1 μA	±(1.5% + 5 dgt)	Up to 200 mA 40 Hz to 400 Hz
	2000 μA	1 μA
	20mA	0.01mA
	200mA	0.1mA
DCA	200 μA	0.1 μA	±(1.2%rdg + 5dgt)	Up to 200 mA
	2000 μA	1 μA
	20mA	0.01mA
	200mA	0.1mA
Ω	200 ohms	0.1 Ω	±(2.5%rdg + 5dgt)	Open circuit voltage: approx. 3.5 V
	2 kΩ	0.001 kΩ	±(1.0%rdg + 5dgt)
	20 kΩ	0.01 kΩ
	200 kΩ	0.1 kΩ
	2 MΩ	0.001 MΩ
	20 MΩ	0.01 MΩ	±(2.5%rdg + 5dgt)

	Buzzer Threshold	remarks
Continuity check	Approximately 50 Ω	Open circuit voltage: approx. 1.0 V

	range	resolution	remarks
Diode Check	0 V to 3 V	1 mV	Open circuit voltage: approx. 3.5 V

*Accuracy guarantee for AC voltage/current is limited to sine waves.
*At 23±5°C, 75% RH or less

General specifications

Detection method	Average value method
display	LCD, maximum display “1999”
Range switching	Auto
Overrange display	"OL" mark display
Low battery indicator	When the battery voltage drops, a battery symbol is displayed.
polarity display	Automatic switching, only "-" displayed
sampling	Approximately 3 times/second
Auto Power Off	Approximately 15 minutes (can be canceled)
Operating temperature and humidity	0 to +40°C, 75% RH or less (no condensation)
Storage temperature and humidity	-20 to +60°C, 80% RH or less (no condensation)
size	Approx. W 65 × H 130 × D 32 mm
weight	Approximately 130 g (including batteries)
Test lead length	Approximately 75cm
power supply	2 x AAA batteries
battery life	Approximately 800 hours (when using alkaline batteries)
accessories	Instruction manual, test leads
option	200 mA fuse: DMF-3502 Replacement test lead: ATL-3N.html
proofreading	Possible
Compliance standards	IEC61010-1 CAT II 1000V, CAT III 600V
JAN	4983621100464

*The battery included with this device is a sample. It may have a shorter battery life than regular commercially available batteries. Heavy use of the backlight/buzzer will shorten the battery life.