CUSTOM Waterproof conductivity meter CD-1000PE

Conductivity and temperature are displayed simultaneously.

• Conductivity, TDS (total soluble impurities), and salinity can be measured with one unit.
• IP67 dust and water resistant.
• "Auto-lock function" holds the measurement value after it has stabilized.
• Backlight function.
• One-point calibration is possible using a conductivity standard solution (e.g., 1413 μS/cm).
• For various water quality surveys (e.g., industrial wastewater, pollution monitoring of water tanks and rivers, etc.), and as laboratory equipment for schools.

Features

The large LCD screen simultaneously displays conductivity and temperature.

IP67 dust and water resistance

Measurements can also be taken underwater using the included standard sensor.
*The model in the image is an image of the series model.

Part names/sensor shape

Main unit

• Liquid crystal display
• ENTER button
• CAL/ button
• SET/% button
• Power button
• Sensor fixing ring
• Sensor
• Sensor cap

sensor

Sensor immersion guideline for the object

Back to top of page

specification

Electrical Performance

conductivity

range	resolution	Measurement accuracy	ATC (Automatic Temperature Compensation)
0.0 μS/cm to 20.00 mS/cm	0.1 μS/cm to 0.01 mS/cm	±2%FS	can be

TDS (Total Dissolved Impurities)

range	resolution	Measurement accuracy
0.0 mg/L(ppm) ~ 10.00 g/L(ppt)	0.1 mg/L(ppm) ~ 0.01 g/L(ppt)	±2%FS

salt

range	resolution	Measurement accuracy
0.0 mg/L(ppm) ~ 13.00 g/L(ppt)	0.1 mg/L(ppm) ~ 0.01 g/L(ppt)	±2%FS

temperature

Measurement range	resolution	Measurement accuracy
0 to +60°C	0.1	±1°C

General specifications

sampling	Approximately 3 times/second
Auto Power Off	Approximately 20 minutes (cannot be canceled)
Operating temperature and humidity	0 to +50°C, 75% RH or less (no condensation)
Storage temperature and humidity	0 to +60°C, 80% RH or less (no condensation)
size	Approx. W 40 × H 185 × D 48 mm
weight	Approximately 130 g (including batteries)
power supply	1 x AAA battery
battery life	Approximately 120 hours (when using alkaline batteries)
Product composition	Waterproof conductivity meter body + standard conductivity meter sensor ( CDS-01PE )
accessories	Instruction manual (with warranty), calibration standard solution for conductivity meter ( CDW-1000 )
option	Standard sensor for conductivity meter: CDS-01PE Calibration standard solution for waterproof conductivity meter: CDW-1000
proofreading	Not possible
JAN	4983621706055