CUSTOM Waterproof ORP/pH meter PH-6600: 马来西亚的首选 MTM Precision Sdn Bhd

详情

Product overview

*1 Sensor included
*2 Sensor sold separately
*3 When using a pH sensor
*4 IP57 compliant
*5 Approximately 10 minutes (cannot be canceled)

It is also possible to measure oxidation-reduction potential by replacing it with an ORP sensor (sold separately).
IP57 waterproof
Equipped with a HOLD function that freezes and displays measurement values. Equipped with a MAX (maximum value)/MIN (minimum value) memory function. Equipped with an auto power-off function. (The power will automatically turn off if there is no operation for 10 minutes after the last button operation. (Can be disabled.)

① Battery cover
② Display: Displays the ORP/pH measurement values.
③ Power/CAL button: Used to turn the power of the main unit on/off and to perform calibration.
④ H/M button: Used for HOLD (display freeze) function and MAX/MIN (maximum/minimum value) display.
⑤ Sensor fixing cap: Remove when replacing the sensor.
⑥ Sensor part: Immerse in the solution to be measured.
⑦ Sensor cover: Remove it when taking a measurement. When storing, fill the inside of the sensor cover with preservative solution and then reattach it.
⑧ Sensor cap

range	resolution	Measurement accuracy
0.00 to 14.00 pH ^*6	0.01 pH	± 0.1 pH

*6 0 to +90°C

range	resolution	Measurement accuracy
-1000 to +1000 mV ^*7	1 mV	±2%FS

*7 0 to +50°C

Measurement range	resolution	Measurement accuracy
0 to +90°C	0.1℃	±0.5℃

sampling	Approximately 2 times/second
Auto Power Off	Approximately 10 minutes (cannot be canceled)
Operating temperature and humidity	0 to +50°C, 80% RH or less (no condensation)
Storage temperature and humidity	-10 to +60°C, 70% RH or less (no condensation)
size	Approximately W 37.5 × H 170 × D 37.5 mm
weight	Approximately 87 g (including batteries)
power supply	CR2032 lithium battery x 2
accessories	Instruction manual, calibration standard solution ( B-4 , B-7 ), storage solution, pH sensor ( PH-6600S , already connected to the main unit)
option	Replacement pH sensor: PH-6600S Replacement ORP sensor: ORP-6600S Calibration standard solution: B-4 , B-7
proofreading	Not possible
JAN	4983621705225

*Please use the commercially available "KCL solution 3.3 mol" as the storage solution.