MITECH - Digital Barcol Impressor 934-1S

MITECH - Digital Barcol Impressor 934-1S
Brand: Mitech
Model: 934-1S

Product Introduction:

The 934-15 digital Barcol impressor is a new indentation hardness tester designed and developed by our company. It is characterized by a balanced positioning device and a hardness value digital display device. It's also characterized by good stability, convenient calibration and high detection accuracy. It's mainly used in the aluminum processing industry for testing pure aluminum, soll aluminum alloy, thicker aluminum alloy, aluminum strip, aluminum profile, aluminum bar, aluminum casting, aluminum forging and aluminum alloy products; It can also he used in the fiberglass industry. The relevant standards are ASTM 8648-00 "Test Method for Measuring Hardness of Aluminum Alloy with Barker Hardness Tester", ASTM HD2583-07 "Test Method for Measuring Hardness of Hard Plastic Indentation with Barker Hardness Tester" and GB/T 3854-2005 "Barker hardness Test Method for Hardness of Reinforced Plastic".

• Small and light, one hand operation, only need press, to experience needed,can be used in any situation.
• Wide range of tests. From very soft pure aluminum to very hard aluminum, the effective test range is equivalent to brinell hardness 25-130HBW.
• No support required. The Barcol impressor is only tested on one side of the sample without support and is suitable for testing very large and thick workpieces.
• With the function of maximum holding, it can record the maximum hardness value during measurement.
• Resides the Barcol hardness, the Brinell hardness number (HB), Vickers hardness number (HV1, Webster's hardness number (HW) and Rockwell hardness number (HRB/HRE HRF/HRH) of the material all can be measured.
• It has the function of calculating the average value of 29 groups of data at most.

• 81-88 HBa Ba
• 42-48 HBa2118

• 81-8811Ha=1.5HB
• 42-4811Ba-25 HBa

• Temperature 0-40℃
• Humidity 80% RH

• Mainframe
• Supporting foot
• Spare indenters (2 pieces)
• Hardness block 12 pieces)
• Correction wrench
• Portable case

• High value hardness block
• Lew valur hardness block.
• Spare indenter