| Model |
JNS-450 |
| Parameters |
| Dimension L×W×H |
2600×1800×1650mm（1-2 pot） |
| Transporting System |
| PCB Width |
60-450mm |
| PCB Length |
120-500mm |
| PCB Top Space |
Max ：120mm |
| PCB Bottom Space |
Max ：50mm |
| PCB Edge Size |
4mm |
| Conveyor Height |
900±20 |
| Conveying Speed |
0.2-10m/min |
| PCB Weight |
Max:5kg |
| Fluxer Module |
| Flux Capacity |
2L |
| The Size of Flux Nozzle Tube |
130um |
| Flux Width |
2-8mm |
| Preheating Module |
| Bottom movable Infrared Heater |
Max:14kw |
| Temperature Range |
Room Temperature-250℃ |
| Top Air Heater |
Max：6kw |
| Soldering Module |
| Min Diameter of Solder Nozzle |
¢2/4.5 |
| Wave Height |
30 5mm |
| Solder Pot Capacity |
8KG（Solenoid Pump）/13KG（Mechanical Pump） |
| Soldering Temperature |
Max：350℃ |
| Heating Time |
40min/(Mechanical Pump 300℃）/75min/(Solenoid Pump 300℃） |
| Pot Heating Power |
1KW/ Single pot |
| Location Speed |
X/Y：2-200mm/s |
| Temp.Control Accuraey |
±2℃ |
| Soldering Accuracy |
±0.25mm |
| Control System |
| PC Operating System |
Windows 10 |
| Process Visualization |
CCD Visual |
| Software Language |
Chinese and English Changeable |
| Programming Mode |
Inline/Off line Programming |
| Data Import |
Gerber、Image█Introduction |
| Air System |
| Air Supply |
N2/O2 |
| Required Pressure |
0.4-0.8Mpa |
| N2 Consumption |
Each█consumes█about█1.5-2█m³/h |
| N2 Concentration |
≥99.999% |
| Electrical Parameter |
| Power Supply |
AC 380VAC 3Φ5W 50/60Hz |
| Consumption |
35KW |
| Air Exhaust |
| Air Duct Diameter |
¢200mm x3 |
| Exhaust Air Rate |
360 m³/h |
| The above contents are subject to change without further notice! |
Malaysia
