| Parameters |
Smartcell-400 |
| Dimension（L×W×H） |
1650×1800×1650mm |
| Transporting System |
| PCB Width |
60-400 mm |
| PCB Length |
120-400 mm |
| PCB Top Side Clearance |
Max.120 mm |
| PCB Bottom Side Clearance |
Min.50 mm |
| PCB Edge Clearance |
4 mm |
| Conveyor Height |
900±20 |
| Conveying speed |
0.2-10M/min |
| Pallet/PCB weight |
Max:5kg |
| Flux Module |
| Flux Capacity |
2L |
| The Size of Flux Nozzle Tube |
130um（Double Nozzle is option） |
| Flux Width |
2-8mm |
| Preheat Module |
| Bottom Dynamic Infrared Heater |
Max: 9KW |
| Temperature Range |
RT~250℃ |
| Top Air Heater |
Max：6KW |
| Temp. Control Accuracy |
±15℃ |
| Soldering Module |
| Min Diameter of Solder Nozzle |
¢3/5 |
| Wave Height |
5mm |
| Solder Pot Capacity |
8KG/pot |
| Soldering Temperature |
Max ：350 ℃ |
| Heating Time |
40min/(300℃） |
| Pot Heating Power |
1KW/Single pot |
| Location Speed |
X/Y：2-200mm/s Z：2-50mm/s |
| Soldering Accuracy |
±0.25mm |
| Control System |
| PC Operating System |
Windows10 |
| Process Visualization |
CCD Visual |
| Software Language |
Chinese and English Changeable |
| Data Import |
Gerber、Image Import |
| Programming Mode |
Inline/Offline Programming |
| Electrical Parameter |
| Power Supply |
AC,380VAC 3Φ 5W 50/60Hz |
| Consumption |
22KW |
| Air Exhaust |
| Air Duct Diameter |
¢150mm |
| Exhaus Air Rate |
360 M³/h |
| N2 Technology |
| Pressure |
0.4-0.8 Mpa |
| N2 Consumption |
Each consumes about 1.5~2 M³/h |
| Concentration |
≥99.999% |
| The above contents are subject to change without further notice! |
Malaysia
