Hager ESC225 Contactor 25A 2NO 230V – Standard 25 A 2-pole contactor with two normally-open contacts; suitable for general switching of single-phase loads via control coil.
Hager Contact Installation Contactor 25A 2NO 230V – Very similar installation-ready contactor with 230 V coil for control circuits.
Hager Contactor 25A 2NO 230V (value) – Budget-friendly 25 A contactor for basic switching applications.
Hager ESC Contactor 25A 2 Pole 230V – Another 2-pole 25 A variant, compact and DIN-rail friendly.
Hager 25A Contact with 3NO+1NC – Contact configuration with three normally-open + one normally-closed contacts if you need extra switching logic.
Hager ESC225S 25A Contactor – Similar to ESC225 but marketed under a slightly different series/packaging.
Rated Current (25 A): The contactor is designed to switch up to ~25 A of load current in typical power circuits.
Control Coil: The coil uses 230 V AC control voltage, so you energize it with standard mains control wiring (e.g., connected through a switch, relay, timer, PLC output).
Contact Configuration: Most units have two normally open (NO) power contacts — these close when the coil is energized to allow current flow.
Durability: Built to handle tens of thousands of operations reliably under load.
Typical Uses
Switching lighting loads or groups of lights
Controlling pumps, fans, HVAC loads
Remote switching in automation panels
Integration with timers, PLCs, timers, home automation
Malaysia