NEW Klarity™ cone material, formulated from a blend of Polypropylene and mica adds sti ness to reduce exing, enabling a lightweight cone with high rigidity, low colouration and lightning-fast response.
The Klarity™ cone is tted with a low-damping surround, thereby achieving both low colouration and expressive dynamics. By simulating many di erent cone shapes and adding ribs to provide further sti ening, a at response curve was achieved without resorting to a high-damping surround, thereby striking the ideal balance.
A precision-made magnet system with an aluminium compensation ring to minimise the e ect of variations in inductance as the voice coil travels. This contributes to an absence of distortion and intermodulation generated by the ‘motor system’.
The voice coil is wound on a high-power epoxy/glass bre bobbin highly unusual in speakers at this price level. This has the advantage of not adding eddy currents and delivering greater power handling than an aluminium bobbin, whilst also being much sti er than the Kapton type associated with this price-class.
The 25mm dome is made from a woven polyester lm with a high-loss coating to deliver open and smoothly extended high frequencies. The magnet system and the front plate have been optimised for wide dispersion and uncompressed behaviour. The front plate is at and exposes the dome as much as possible; only a very short duct on the front plate balances the acoustic load and improves the SPL (sound pressure level) measurement.
The crossover network uses an acoustic LKR 24dB topology. This includes air-core inductors of the type more commonly found in high-end speakers, selected because they produce the lowest distortion of all inductor types. As the resistance of the coil is higher than a standard laminated steel or ferrite core inductor, the magnetic structure of the mid/bass driver has been modied to compensate, resulting in fast, clean bass with no distortion from the inductor.
The DIAMOND 12.1 ’s rear-ported enclosure is precisely sized so that the internal volume works in harmony with the drive unit system to deliver the desired sonic result. A multi-layered sandwich design subdues the identiable characteristics of the cabinet’s ‘sound’. Even the resonant properties of the glue between the layers was measured to determine the optimum combination.
Inside the cabinet, Intelligent Spot Bracing connects opposite walls with a specic form of the wood brace to achieve an optimal reduction of cabinet resonance. These braces are precisely modelled by computer simulation to improve upon the commonplace ‘gure of eight’ brace, which may simply transfer resonance from one wall to another.
General description 2-way bookshelf speaker
Enclosure type bass reex
Transducer complement 2-way
Bass driver 4"(100mm) advanced PP Cone
Treble driver 1"(25mm) Textile Dome
AV shield No
Sensitivity(2.83V @ 1m) 87dB
Recommended amplier power 20-60W
Peak SPL 95dB
Nominal impedance 8Ω Compatible
Minimum impedance 4.0Ω
Frequency response(+/-3dB) 70Hz ~ 20kHz
Bass extension(-6dB) 65Hz
Crossover frequency 2.7kHz
Cabinet Volume (in litres) 4.4L
Dimensions ( H x W x D ) 265 x 160 x (200+28) mm
Net weight 5.1kg/pcs
Malaysia
