temperature control strip curtain | cold room pvc strips | warehouse strip curtains | loading bay strip curtains | noise reducing pvc strips

How to Use, Install & Maintain Ribbed Yellow PVC Strip Curtains

Transforming Your Borneo Business Space with RUBASIA PVC Strips

Congratulations on choosing RUBASIA RUBBERTECH’s Ribbed Yellow PVC Strip Curtains. This guide will show you how to effectively use, install, and maintain them to solve common problems in industrial and commercial settings across Borneo, from the busy ports of Bintulu to the food processing plants of Brunei.

Core Concept of Use: How It Works

The principle is simple yet powerful: Create a high-visibility, physical barrier that allows uninterrupted movement while blocking insects, dust, temperature loss, and noise. People and vehicles can pass through freely, but environmental contaminants cannot.

Step-by-Step: How to Install Your PVC Strip Curtain

Proper installation is key to maximizing performance. You will need: a tape measure, a spirit level, a power drill, screws, and the appropriate mounting system.

1. Planning & Measurement (The Most Important Step)

• Measure the Opening: Accurately measure the width (W) and height (H) of the door or opening you want to cover in your Kota Kinabalu warehouse or Kuching workshop.
• Calculate Strip Quantity:
  • For full coverage, strips should overlap by 25-30%.
  • Formula: Number of Strips = (Opening Width (W) / Strip Width (200mm)) * 1.3
  • *Example: A 2000mm (2m) wide doorway requires: (2000 / 200) * 1.3 = 13 strips.*
• Calculate Total Length: Total Meters Needed = Number of Strips * Opening Height (H)
  • *Example: For the same 2m wide x 2.5m high door: 13 strips * 2.5m = 32.5 meters.*
• Choose Mounting Hardware: Decide between:
  • Aluminum Channel (Most Professional): Provides the cleanest, most secure finish. The strips are inserted into a top channel. Essential for high-traffic areas like Sepanggar Bay logistics centres.
  • Stainless Steel Hooks: Simple and effective. Hooks are screwed into the lintel, and strips are hung individually. A good DIY solution for smaller doors in Sibu shops.
  • Direct Fixing (Not Recommended): Screwing directly through the strips can cause tearing over time.

2. Installation Process

1. Prepare the Mounting Surface: Ensure the area above the door (the lintel) is clean, dry, and structurally sound. Use a spirit level to mark a straight line.
2. Fix the Mounting Channel or Hooks: Secure your chosen aluminum channel or hooks to the lintel using the drill and screws, following your marked line.
3. Prepare the Strips: Using a sharp utility knife or heavy-duty scissors, cut each strip to the required length (Door Height + extra for the mounting channel).
4. Hang the Strips:
   • For Channel: Gently insert each strip into the channel's slot. Start from one end and work across.
   • For Hooks: Place the reinforced hanging hole of each strip onto a hook.
5. Ensure Proper Overlap: Once all strips are hung, adjust them so they are evenly spaced and overlapping correctly. The classic installation has strips hanging straight down, but for very wide doors, a staggered or double-layer installation provides an even better seal.

How to Use: Application-Specific Guidance for Borneo

1. For Insect Control in Food Areas (e.g., Plants in Papar, Sandakan)

• How to Use: Install the curtain at all external doorways and internal entrances to high-hygiene zones (e.g., packing areas). Ensure the strips form a complete seal with the floor and sides.
• Pro Tip: For maximum effect, combine with an air curtain above the doorway. The PVC strips form the primary barrier, while the air blast disrupts any determined insects.

2. For Temperature Control in Cold Rooms (e.g., Supermarkets in Brunei, Miri)

• How to Use: Install on both the inside and outside of the cold room doorway. The 2mm thick strips create an insulating air pocket, drastically reducing cold air loss when the door is opened.
• Pro Tip: Cut the strips 50mm longer than the door height so they "brush" the floor, creating a perfect seal. This is crucial for energy savings.

3. For Warehouse & Loading Bays (e.g., Ports in Bintulu, Labuan)

• How to Use: Use the strips to seal loading bay doors. Forklifts can drive through them without stopping, maintaining security and environmental control.
• Pro Tip: For very wide loading bays, use a double-layer system with a gap of about 1 meter between layers. This creates an airlock effect for superior temperature and dust control.

4. For Noise & Dust Reduction in Workshops (e.g., Factories in Kota Kinabalu, Samalaju)

• How to Use: Partition off noisy or dusty areas like welding stations, woodworking shops, or grinding rooms. The strips contain contaminants while allowing easy access.
• Pro Tip: Ensure the strips overlap significantly (up to 40%) for the best acoustic and particulate sealing.

How to Maintain & Clean Your PVC Strips

Maintenance is simple but essential for longevity in Borneo's climate.

• Routine Cleaning: Wipe down the strips regularly with a soft cloth or sponge dipped in a mild soapy water solution. This removes dust and grime that can reduce clarity and attract dirt.
• Deep Cleaning: For tougher grease or residue (common in Kuching workshops), use a diluted citrus-based or non-abrasive cleaner. Avoid harsh chemicals, solvents, or abrasive pads that can damage the material.
• Inspection: Periodically check for any cuts, tears, or damage, especially at the hanging point. Individual damaged strips can be easily replaced without taking down the entire curtain, saving time and money.
• Storage: If storing spare rolls, keep them in a cool, dry place away from direct sunlight to maintain their properties before use in towns like Tawau or Limbang.

Troubleshooting Common Issues

• Problem: Strips don't swing back properly.
  • Solution: They may be too short. They should be long enough to overlap and have weight to return to position. Check for obstructions on the floor.
• Problem: Gaps at the sides.
  • Solution: You may need an additional strip or side guides/channels to complete the seal.
• Problem: Insects are getting through.
  • Solution: Verify there are no gaps at the top, sides, or bottom. Ensure the yellow colour is clean and not obscured by dirt.

Get Expert Installation Support Across Borneo

While a DIY project is possible, for large-scale or critical applications, professional installation ensures optimal performance.

RUBASIA RUBBERTECH provides consultation and can recommend trusted installation partners across Sabah, Sarawak, and Brunei, including:

• Sabah: Kota Kinabalu, Sandakan, Tawau, Lahad Datu
• Sarawak: Kuching, Miri, Sibu, Bintulu
• Brunei: Bandar Seri Begawan, Kuala Belait, Seria

CALL TO ACTION:
Need help with your project? Contact us today for:

• Free Technical Advice on the best setup for your doorway.
• A Precise Quote for the exact amount of material you need.
• A List of Recommended Installers in your area (Kuching, Brunei, Kota Kinabalu, etc.).