RANKCONN - Moving Die Rheometer (MDR) RC-321
Brand : Rankconn Instruments
Model : RC-321
Product Descriptions
Moving Die Rheometer is a widely used tester in rubber processing industry, rubber quality control and basic research rubber, For optimize formula of rubber provide accurate data, It can accurately measure the scorch time, rheometer time, sulphide index, the maximum and minimum torque and other parameters.
Product Features
Optimum Test Data: The comparison test can be done on the same interface for any secondary vulcanization test. The multiple vulcanization curves drawn can be compared to find out the best experimental data
Mature Technology: The instrument development platform based on large databases, temperature control devices using the software to directly control and collection and processing. Instrument to overcome the general curing temperature of the shortcomings of using temperature controller (accuracy poor).
Scientific Design: This instrument has statistics, analysis, storage and comparison functions. Humanized design, easy to operate.
High Accuracy: Using imported high-precision sensors
Technical Specifications
| Model |
DZ-321 Moving Die Rheometer for rubber processing industry |
| Standard |
GB/T16584 IS06502 |
| Temperature |
room temperature to 230 Centigrade |
| Heating-up |
15 Centigrade/min |
| Temperature fluctuation |
≤ ±0.3 Centigrade |
| Temperature resolution |
0.01 Centigrade |
| Torque range |
0-5N.M,0-10N.M,0-20N.M (optional) |
| Torque resolution |
0.001NM |
| Power |
50HZ, 220V±10% |
| Pressure |
0.4Mpa |
| Air-pressure requirement |
0.5Mpa--0.65MPa (user prepare the dia 8 trachea) |
| Environment temperature |
10~20℃ |
| Humidity range |
55--75%R.H |
| Compressed air |
0.35~0.40Mpa |
| Oscillation frequency |
100r/min (about 1.67HZ) |
| Oscillation angle |
±0.5 Degree |
| Printing |
Date, time, temperature, vulcanization curve, temperature curve, ML,MH,ts1,ts2,t10 ,t50, Vc1, Vc2. |
Malaysia
