The IoT interface is a central component for the intelligent networking of Rittal cooling solutions or sensors for monitoring physical ambient conditions. Equipped with a wide range of interfaces and protocols, it is used to collate and transmit data to superordinate IT systems or to systems for the local monitoring of machine statuses.
Benefits
Digitalisation and networking offer huge opportunities for every company. With the IoT interface, Rittal cooling solutions and sensors for monitoring physical ambient conditions are easily connected to Industry 4.0 environments without affecting the automation logic.
Plug and run: The IoT interface is quickly and conveniently configured and commissioned via the integral Web server, no programming required.
Material
Plastic to UL 94-V0
Colour
RAL 7016
Supply includes
IoT interface
USB cable (USB-A connector on micro-USB-B connector)
Angle bracket for Blue e+ cooling unit
Type of electrical connection
Push-in spring connection terminal (24 V DC)
Interface bus system
2 x RJ45 CAN bus
Network interface
Ethernet IPv4/IPv6
Ethernet to IEEE 802.3 via 10BASE-T, 100BASE-T and 1000BASE-T
Interfaces
1 x Micro USB type B (device) for USB 2.0
1 x Micro-SD memory card slot for SD 2.0
1 x USB 2.0 high-speed functions (EHCI)
1 x acknowledgement button
1 x push-in spring connection terminal for NTC sensor
2 x RJ45 jack for RS 485 interface (climate control unit interface)
Assembly instruction
The IoT interface can be secured on a 35 x 7.5 top hat rail to DIN EN 60715 using a spring-loaded metal clip, or to the rear of a Blue e+ cooling unit using the angle bracket.
Note
The IoT interface is only supported by Blue e+ cooling units from firmware version 1.11.0 or above.
To interlink cooling units in the Blue e series, the Blue e IoT adaptor (3124.310) is additionally required.
TECH IMPRO AUTOMATION SOLUTION SDN BHDIndustrial Automation Supplier Malaysia, Flow Meter Supply Penang, Pressure Transmitter Supplies Butterworth ~ TECH IMPRO AUTOMATION SOLUTION SDN BHD
