Elec-component
2SC3568
2SC3568

 

2SC3568

Utsource Holding Company Limited flag
分类: Elec-component 当前有货 (数量:9999999)
欲了解更多详情，请游览我们的官方网站 utsource.us
游览官方网站 联络我们
详情

BUY 2SC3568 https://www.utsource.net/itm/p/12610451.html

Below is the parameter table and instructions for the 2SC3568 transistor:

2SC3568 Parameter Table

Parameter Symbol Min Typ Max Unit Condition
Collector-Emitter Voltage VCEO - - 60 V IC = 150 mA, TA = 25°C
Collector-Base Voltage VCBO - - 70 V IC = 0, TA = 25°C
Emitter-Base Voltage VEBO - - 6 V IE = 5 mA, TA = 25°C
Collector Current IC - 150 300 mA VCE = 10 V, TA = 25°C
Base Current IB - - 15 mA VCE = 10 V, TA = 25°C
DC Current Gain hFE 40 100 300 - IC = 150 mA, VCE = 10 V, TA = 25°C
Transition Frequency fT - 200 300 MHz IC = 150 mA, VCE = 10 V, TA = 25°C
Power Dissipation PT - - 1000 mW TA = 25°C
Junction Temperature TJ - - 150 °C -
Storage Temperature Range TSTG -55 - 150 °C -

Instructions for Use

  1. Mounting:

    • Ensure that the transistor is mounted on a suitable heatsink if it will be operating at high power levels.
    • Use thermal paste to improve heat transfer between the transistor and the heatsink.

  2. Biasing:

    • The base-emitter voltage (VBE) is typically around 0.6 to 0.7 V for this transistor.
    • Use a current-limiting resistor in series with the base to prevent excessive base current, which can damage the transistor.

  3. Operating Conditions:

    • Do not exceed the maximum ratings listed in the parameter table.
    • Ensure that the collector-emitter voltage (VCE) does not exceed 60 V.
    • Keep the junction temperature (TJ) below 150°C to avoid thermal runaway.

  4. Storage:

    • Store the transistor in a dry, cool place away from direct sunlight.
    • Handle the transistor with care to avoid static discharge, which can damage the device.

  5. Testing:

    • Use a multimeter to check the continuity and resistance between the pins before installing the transistor in a circuit.
    • Test the transistor in a simple circuit to ensure it is functioning correctly.

  6. Soldering:

    • Use a low-wattage soldering iron to avoid overheating the transistor.
    • Solder quickly to minimize heat exposure.

By following these instructions, you can ensure the reliable operation and longevity of the 2SC3568 transistor in your circuits.

(For reference only)

更多 Utsource Holding Company Limited 相关资料
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
联络我们 flag