Elec-component
G2E-184P-M-US-24V
G2E-184P-M-US-24V

 

G2E-184P-M-US-24V

Utsource Holding Company Limited flag
分类: Elec-component 当前有货 (数量:9999999)
欲了解更多详情，请游览我们的官方网站 utsource.us
游览官方网站 联络我们
详情

BUY G2E-184P-M-US-24V https://www.utsource.net/itm/p/12604670.html

Parameter Description Value
Part Number Full part identification G2E-184P-M-US-24V
Type Relay type SPDT (Single Pole Double Throw)
Coil Voltage Voltage required to energize the relay coil 24V DC
Coil Current Current drawn by the relay coil 10mA
Contact Form Configuration of relay contacts 1C (1 Common)
Contact Rating Maximum current and voltage the contacts can handle 10A, 250V AC / 24V DC
Insulation Resistance Resistance between contacts 100MΩ at 500V DC
Dielectric Strength Voltage the insulation can withstand 2500V AC for 1 minute
Operating Temperature Temperature range for operation -40°C to +85°C
Storage Temperature Temperature range for storage -40°C to +85°C
Mechanical Life Expected number of operations without failure 10 million operations
Electrical Life Expected number of operations under load 100,000 operations
Mounting Method of attaching the relay PCB mount
Terminal Type Type of terminals provided Quick connect
Dimensions Physical size of the relay 17.5mm x 12.5mm x 13.5mm

Instructions:

  1. Installation:

    • Ensure that the relay is installed in a well-ventilated area within the specified temperature range.
    • Use the provided quick-connect terminals for secure connections.

  2. Coil Connection:

    • Connect the coil terminals to a 24V DC power supply.
    • Ensure correct polarity to avoid damage to the relay.

  3. Load Connection:

    • Connect the load to the common (COM) and normally open (NO) or normally closed (NC) contacts based on your application requirements.
    • Do not exceed the contact ratings to prevent premature failure.

  4. Operation:

    • When the coil is energized, the common terminal switches from NC to NO.
    • De-energizing the coil returns the common terminal to its default NC position.

  5. Maintenance:

    • Regularly inspect the relay for signs of wear or damage.
    • Replace the relay if any abnormalities are detected.

  6. Safety Precautions:

    • Always disconnect power before performing any maintenance or installation.
    • Follow all local electrical codes and regulations.
(For reference only)

更多 Utsource Holding Company Limited 相关资料
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
联络我们 flag