详情
BUY G5Q-14-24V G5Q-14-24VDC G5Q-14-DC24V 24V 10A 5PINS https://www.utsource.net/itm/p/12604668.html
| Parameter |
Value |
| Product Code |
G5Q-14-24V, G5Q-14-DC24V |
| Supply Voltage |
24V DC |
| Rated Current |
10A |
| Pin Configuration |
5 Pins |
| Coil Resistance |
Refer to datasheet |
| Operating Temperature |
-25°C to +70°C (typical) |
| Insulation Resistance |
>100MΩ at 500VDC |
| Dielectric Strength |
1500VAC for 1 minute |
| Contact Material |
Silver alloy |
| Contact Form |
SPDT (Single Pole Double Throw) |
| Electrical Life |
10 million operations |
| Mechanical Life |
20 million operations |
Instructions:
Installation:
- Ensure the relay is installed in a location that maintains the operating temperature range.
- Secure the relay using the mounting hardware provided or suitable alternatives.
Wiring:
- Connect the control voltage (24V DC) to the coil terminals.
- Wire the load to the common and normally open/closed contacts as per your application requirements.
- Ensure all connections are tight and secure to prevent arcing or poor contact.
Operation:
- When the control voltage is applied to the coil, the relay will switch, connecting the common terminal to either the normally open or normally closed terminal depending on the relay state.
- Ensure the load current does not exceed the rated current of 10A to avoid damage to the relay.
Maintenance:
- Periodically inspect the relay for any signs of wear or damage.
- Clean the relay with a dry cloth; do not use solvents or liquids as they may damage the components.
Safety Precautions:
- Always disconnect power before handling or servicing the relay.
- Use appropriate personal protective equipment when working with electrical systems.
(For reference only)
更多 Utsource Holding Company Limited 相关资料
