ENDURO 6001 (61001) Hub Bearing - 12mm x 28mm x 8mm

This is a radial bearing generally used as a hub bearing for some quick-release hub designs. The Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Enduro's bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.

WHICH BEARING TO CHOOSE?

61001 | Abec-5

• Deep groove design races
• Grade 10 balls (high carbon chromium steel)
• Fill with high pressure water proof grease
• Static load: 443bf / 1.97kN
• Weight: 20.85g

71001 | Abec-5 Angular Contact
In standard radial bearings, only three or four of the balls make contact during load. But Enduro angular contact bearings work differently. When properly installed and adjusted (black seal facing in), Enduro angular contact bearings engage all of the bearing's balls to spread the force over a larger surface area, decreasing friction, minimizing wear and increasing bearing life.

• Deep groove design races
• Grade 10 balls (high carbon chromium steel)
• Fill with high pressure water proof grease
• Static load: 443lbf / 1.97kN
• Weight: 19g

S6001 | Stainless Steel 440C

• Deep groove design stainless steel alloy races
• Grade 10 balls (stainless steel)
• Fill with Mobil XHP 222 high pressure water proof grease
• Long life and superior corrosion resistance
• Excellent use in wet conditions
• Two years anti-corrosion warranty
• Static load: 427lbf / 1.90kN
• Weight: 19.3g

CO 6001 | Ceramic Zero

• Deep groove design black-oxide treated 52100 high-Carbon Chromium alloy races (extra level of corrosion resistance)
• Grade 5 balls (Silicon-Nitride Ceramic) increase bearing life
• Fill with high pressure water proof grease
• Static load: 533lbf / 2.37kN
• Weight: 17.74g