CONTROL TECHNIQUES Servo Drive Digitax HD M754 Mci Series

A powerful MCi second processor onboard the Digitax M754 servo drive brings a whole host of machine design opportunities. The onboard MCi processor executes comprehensive programs that can control multiple drives and motors simultaneously across realtime networks

Features & Benefits:
1. Maximum performance

• 300% peak current performance pulse-duty overload
• Optimised control loops for high dynamic performance
  • 62.5 μs current loop
  • 250 μs position and speed loop
• Up to 16 kHz switching frequency (default ratings specified at 8 kHz)
• Supports a wide range of feedback technologies including EnDat 2.2, Hiperface SinCos, Incremental Quadrature, SinCos, BiSS-C, SSI, Resolvers and others
• Maximum performance package with high torque density, low inertia Unimotor hd servo motors

• Distributed clocks to synchronise position, speed and current loops across drives
• Precision Time Protocol as defined by IEEE1588 V2
• High speed network synchronisation of less than 1 μs jitter (typically <200 ns)

• Runs application programs up to four time faster than a standard PLC
• Integrates with the onboard AMC (Advanced Motion Controller) to carry out motion functions at the drive’s 250 μs cycle time
• Can coordinate multiple drives over the Ethernet network, providing perfectly synchronised multi-axis machine performance
• Programs are fast and easy to develop thanks to the user-friendly Machine Control Studio software which uses industry standard IEC61131-3 programming languages

• 40 mm drive width – 25 drives (up to 16A each) can fit in just 1 meter of cabinet space  
• Bring space reduction to the same level with complete standalone capability, removing the need for an external controller
• Reduce cabinet height by directly stacking rows of drives. Patented Ultraflow™ technology expels heat directly outside of the cabinet through the rear of the drive (drive heat dissipation can also be achieved via vents on the top of the drive, as standard).
• Fits into cabinets just 200 mm deep

• DIN rail alignment
• Kits for easy multi-axis installation
• Single motor cable and electronic motor name plate for fast set up
• Seamless motor-drive pairing with Unimotor hd servo motors
• Easy access pluggable connectors
• Rapid commissioning with the Connect PC tool and SD cards
• Machine Control Studio provides a flexible and intuitive environment for programming automation and motion control features
  • Programmable with IEC61131 standard languages

• Two Ethernet ports with an internal switch
• Built-in RS485 communications
• Extends connectivity with 3 x digital inputs, 1 x digital output and 1 x digital I/O
• Modbus TCP/IP master (up to 5 nodes)
• Full onboard programmability

• Reduced downtime with machine safety

  - Integrated dual safe torque off

  - Meets SIL3 (Safety Integrity Level 3) and PLe (Performance Level e)