CONTROL TECHNIQUES Servo Drive Digitax HD M753 Ethercat Series: 马来西亚的首选 POWER DRIVE TECHNOLOGY SDN. BHD.

详情

Digitax HD M753 EtherCAT features an integrated 2-port EtherCAT switch for easy integration into centralized motion control applications. EoE (Ethernet over EtherCAT) support allows pc-tool connection for commissioning and monitoring over the EtherCAT network. The new servo drive can operate with motion controllers, motion PLCs and Industrial PCs via built-in EtherCAT.

Features & Benefits:
1. Maximise performance

300% peak current performance pulse-duty overload
Optimised control loops for high dynamic performance
- 62.5 μs current loop
- 250 μs position and speed loop
Up to 16 kHz switching frequency (default ratings specified at 8 kHz)
Supports a wide range of feedback technologies including Quadrature, SinCos (including absolute), SSI, BiSS, EnDat (up to 4 Mb with EnDat 2.2) and resolvers
Maximum performance package with high torque density, low inertia Unimotor hd servo motors
On-board Advanced Motion Controller for distributed 1.5 axis motion control
High speed network synchronisation of less than 1 μs jitter

2. Minimum size

40 mm drive width and option bracket adds 22 mm, providing a highly competitive maximum drive width of 62 mm
MCi210 Machine Control module for complete standalone capability, removing the need for an external controller
Reduce cabinet height by directly stacking rows of drives. Patented Ultraflow™ technology expels heat directly outside of the cabinet through the rear of the drive (drive heat dissipation can also be achieved via vents on the top of the drive, as standard).
Fits into cabinets just 200 mm deep

3. Easy installation and setup

DIN rail alignment
Kits for easy multi-axis installation
Single motor cable and electronic motor name plate for fast set up
Seamless motor-drive pairing with Unimotor hd servo motors from Control Techniques
Easy access pluggable connectors
Rapid and flexible commissioning
- Ethernet over EtherCAT (EoE) for PC tool communication
- File over EtherCAT (FoE) for drive parameter transfer
- Rotary dials can be used for local setting of the station alias

4. Flexibility

Operate with any automation product via EtherCAT

- Operate with motion controllers, motion PLCs and Industrial PCs via built-in EtherCAT

- Dual 100Mbps EtherCAT interfaces for use with in-line topologies

- Non-cyclic data communication using the CoE mailbox
Flexibility for all applications achieved through full access to drive functions
- CANopen over EtherCAT (CoE) with CiA-402 profile including:
- Cyclic synchronous position mode
- Cyclic synchronous velocity mode
- Cyclic synchronous torque mode
- Homing mode
- Interpolated position mode
- Velocity mode
- SDO access to all profile objects and drive parameters

An optional RS485 adaptor is available, providing a back-up PC tool connection in case of network failure