SNAP-ON Electronic Torque Tester / Model: QC2DTT250: 马来西亚的首选 ALLIANCE SUPPLIES SDN BHD

详情

Units Of Measure	N•m, kg•cm, ft-lb, in-lb, in-oz
AC Adaptor	Input: 100–240 VAC (50–70 Hz); Output: 9 VDC, 1.66 A
Operating Modes	TRACK, PEAK, FIRST PEAK
Operating Temperature	32–122 °F (0–50 °C)
Display Resolution	480 (RGB) x 272
Data/Surge/Recall	Memory Capacity—500 Records (complete check mode only)
Power Supply	Included 9 V AC/DC Adaptor, (6) AA Batteries Included
Integral Transducer	Full bridge strain gauge, 350 ohms, 1,500 eU, 3 mV/V F.S., 3.3 V excitation
Country Of Origin	USA
Display Range, Maximum-Minimum, inches (metric)	25–250 in-lb (28.2–282.5 dN•m)
Display Size, inches (mm)	4.7 (119)
Dimensions	10'' W x 15.2'' H x 2-1/2'' D (254 mm W x 386 mm H x 63.5 mm D)
Storage Temperature Range	-20–50 °C (-2–122 °F)
Drive Size	3/8
Accuracy	±0.5% of Indicated Test Value from 10–100% or Rated Capacity
Weight, lb (kg)	11 (5)
Range, N•m	2.9–28.2
Battery	(6) 1.5 V (AA) replaceable
Square Drive, inches	3/8
Humidity	85% Relative Humidity @ 21 °C (70 °F)
Range English	25–250 in-lb
Relative Humidity Range	85% Relative Humidity @ 21 °C (70 °F)
Display	LCD on swivel neck

Features

Easy-to-use, color touch screen provides quick, easy-to-understand torque readings
Highly accurate scale (±0.5% ± 1 count 10-100% CW and CCW of indicated test value at 25 ° C)
Ability to track and store up to 500 records; can trace records by torque wrench serial number and/or technician ID
Ability to customize between units of measure (Nm, kg-cm, ft-lb, in-lb, in-oz), operation modes (Track, Peak, First Peak) and wrench type
Testing option of ASME?-style specifications
Color-coded numbers/torque tracking bar allows user to actively observe low (yellow), good (green) and high (red) readings
Data can be downloaded to a computer via USB cable (included)
Operating temperature (10-32 ° C/50-90 ° F)
Refresh rate of 1,000 data points per second
CSA/UL Requirements: Power supply listed under UL (C and US); 100-240 V/50-60 Hz, 6 A input and 9 V/1.66 A output