|
Test voltage |
|
Output voltage |
AC 0.2 to 5.00 kV (50 Hz and 60 Hz switchable) |
|
Output capacity |
500 VA (5 kV, 100 mA)
Continuous application time of the maximum current output within 1 min. |
|
Wave form |
Sine wave ( Rate of strain: Less than 5 %, when No-load applied.) |
|
Power frequency |
50 / 60 Hz |
|
Voltage fluctuation rate |
Less than 15 % (Maximum rating ➔ No-load: in resistive load) |
|
Voltage application method |
Zero cross switch |
|
Voltage measurement |
|
Rectification method |
Average rectified effective value display |
|
Digital display |
Applied voltage is displayed during test, and the value is retained after the test end. |
|
Measurement accuracy |
± (0.5 % of F.S + 10 V) |
|
Current measurement |
|
Rectification method |
Average rectified effective value display |
|
Digital display |
Measurement range 0.00 to 99.99 mA
Leakage current is displayed during test, and the value is retained after the test end. |
|
Judgment method |
|
Upper limit |
Digital comparator, Analog comparator (current more than 100 mA can be detected) |
|
Lower limit |
Digital comparator |
|
|
Setting range |
|
Upper limit |
0.05 to 99.99 mA |
|
Lower limit |
0.01 to 50.00 mA /OFF |
|
Resolution |
0.01 mA |
|
|
Judgment conditions |
|
Upper limit ≧ Leakage current ≧ Lower limit |
・・・ GOOD |
|
Upper limit ＜ Leakage curent |
・・・ HIGH NG |
|
Lower limit ＞ Leakage current |
・・・ LOW NG |
|
|
Test time |
|
Setting range |
00:00.2 to 99:59.9 s and OFF (continuous) |
|
Setting resolution |
0.1 s |
|
Time display |
|
During test |
Remaining time is displayed, when timer is ON.
Elapsed time is displayed, when timer is OFF. |
|
End of test (during wait) |
Set value is displayed. |
|
|
Setting accuracy |
Set value ± (0.1 % + 20 ms) |
|
Rise time |
|
Function |
Voltage rises linearly till test value in setting time. |
|
Setting range |
00:00.1 to 01:59.9 s and OFF
Setting resolution 0.1 s |
|
Setting accuracy |
Set value ± (0.1 % + 20 ms) |
|
Fall time |
|
Function |
Voltage falls linearly from test value to 0 V in setting time. |
|
Setting range |
00:00.1 to 01:59.9 s and OFF
Setting resolution 0.1 s |
|
Setting accuracy |
Set value ± (0.1 % + 20 ms) |
