Spray Dryer Pulvis Mini Spray (GB210-A): 马来西亚的首选 Renetech Sdn Bhd

详情

Capable of drying ultra small samples as low as 0.5g of solid content.Can spray dry into fine powder 1μm in size when optional mini cyclone is used.

Features of Spray Dryer Pulvis Mini Spray (GB210-A)

Compact spray dryer that can produce powder easily on a laboratory scale. It is capable of variety of applications from preliminary experiments in a pilot plant to drying work in general laboratories.
Samples unstable at high temperatures can be reliably processed into fine powder. The heat is applied instantly and indirectly to the powder itself
Prepared fine powder will not be oxidized, contains minimal moisture and is contaminant-free
Direct drying from solution/suspension liquid to fine powder with a reduced risk of contamination. No pre or post processes such as filtration, separation, or pulverization are required
Processing of samples containing organic solvents is made possible by connecting the Solvent Recovery Unit GAS410
This unit can also be used as a fluid bed drying granulator by installing a separate mini bed attachment GF200 instead of GF300 spray drying attachment
An automatic lift is equipped as standard to enable easy installation or removal of glass drying chamber attachment
A service outlet (max. 2A) and a sample stand are equipped as standard for connecting a magnetic mixer for stirring suspended liquid sample
Stable spray drying using a unique peristaltic pump, nozzle cooling mechanism, pulse jet mechanism and a nozzle knocker enable stable spray drying

Control Panel

Inlet temperature, outlet temperature, and drying air amount are digitally displayed. Setting is made on the touch panel that allows operation settings, operation status display as well as error display, and settings of various operation conditions.

Specifications

Item Code	212777
Model	GB210-A
Temp. adjusting unit setting range	40 to 220°C (inlet temperature), 0 to 60°C (Outlet temperature)
Temperature adjusting accuracy	Inlet temperature±1°C
Spraying system	Two-way nozzle, Nozzle No. 1A as standard
Drying air amount adjusting range	0 to 0.7m3/min
Spray air pressure adjusting range	0 to 0.3MPa
Liquid sending pump flow rate range	0 to 26mL/min
Spray air pressure adjusting range	0 to 0.3MPa
Liquid sending pump flow rate range	0 to 26 mL/min
External output	Inlet temperature, Outlet temperature, Temperature outlet (4-20 mA)
Automatic lift	Moving up/down of glass chamber automatic lift
Temperature adjusting device	PID digital temperature adjusting device
Touch panel	Blower, Heater, Liquid sending pump, Pulse jet switch, Error display
Control select switch	Inlet temperature, Output temperature control switch (Outlet temp. control is conditional)
Temperature sensor	2.0kW (at200V) to 2.88kW (at240V)
Heater	2.0 kW (at 200V) to 2.88 kW (at 240V)
Liquid sending pump	Fixed amount peristaltic pump
Spraying air pump	Spraying air compressor (Sold separately) is used.
Service outlet	For stirrer: AC100V, Max. 2A
Suction blower	Bypass blower, Brushless DC motor
Filter	Suction filter, Exhaust filter
Recovery of solvent	Solvent recovery unit GAS410 (sold separately) is used.
Spray nozzle cooling mechanism	Connector: Nipple×2, O.D.:ø10.5 mm
Spray air connection diameter	Nipple diameter:ø7 mm
Exhaust connecting diameter	ø50mm
Accessories	Silicon tube (with a stopper)×3, Tiron tube (with a stopper)×2 Exhaust duct (with one hose band)×1, Outlet temperature sensor, Spray air tube, Sample box, Static electricity removal earth, Teflon braided hose 5m (with two hose bands), Container table
Spray air line washing function	Spraying at the nozzle tip, Manual pulse jet system
Safety function	Inlet / Outlet temperature overheat, Sample feed reverse rotation mechanism, Over current electric leakage breaker, Nozzle connection error
External dimensions（W×D×H mm）	760×420×1350mm
Power Source	AC220V 17A
Weight	110kg

Maintenance and warranty

Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)

External dimensions do not include protrusions.

更多 Renetech Sdn Bhd 相关资料