Low Temperature Baths (BLG200): 马来西亚的首选 Renetech Sdn Bhd

详情

An all-in-one liquid cooling bath with stirrer that eliminates constant monitoring and replenishment of dry ice and liquid nitrogen.

Features of Low Temperature Baths (BLG200)

Features

Lowest temp. reach time is approximately one hour after commencing operation (or within 30 minutes in a no-load state).

Features

Powerful neodymium magnet is used, which enables simultaneous stirring of multiple reactors.

Features

Equipped with ON-timer function (which facilitates preparation for the next day’s experiments).

Features

Temp. of 80℃ below zero (BLG100) is optimum for small-scale experiments (up to 100 ml).

Features

The type for 40℃ below zero (BLG200) is optimum for raw material synthesizing scale (up to 400 ml). Aluminum beads are used in the bath.

Specifications

Item Code	221705
Model	BLG200
System	Stirring cooler 80W, with helium refrigerant (not Freon)
Temp. control range	-40°C to 0°C (at ambient temp. of 23°C ± 5°C)
Temp. control accuracy	±0.3°C (the cooling bath temp. in the stable state)
Temp. fluctuation	±0.3℃
Lowest temp. reaching time	Approx. 60min (20°C → -40°C)
Bath capacity	Aluminum made/ approx. 1000ml
Temperature control	PID control + Inverter control
Temperature display and setting	Digital
Maximum applicable container size	500 mL three-neck flask
Stirring function	Neodymium magnet type. 100 – 1200 rpm, with the rotation speed displayed digitally
Timer	ON timer only (maximum 99 hours 50 minutes)
Accessories	Adiabatic cover, Stainless steel support×2 pieces, Operation manual, Warranty card
External dimensions（W×D×H mm）	210×425×295mm
Remarks(dimensions)	Aluminum made/ approx. 1000ml
Power Source	AC115V / 220VV Single phase with step-down transformer
Weight	15kg

Maintenance and warranty

Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)

External dimensions do not include protrusions.

更多 Renetech Sdn Bhd 相关资料