Description

Renishaw PH10M-iQ PLUS with Inferred Qualification

The range of PH10 PLUS motorised probe heads increases throughput by giving automated CMMs the added capability of program controlled probe re-orientation. This enables the inspection of features at different angles without the need for frequent, time consuming stylus cluster changes.

Less time calibrating, more time measuring!

The inferred qualification allows PH10M iQ PLUS to access multiple positions without having to recalibrate for each one.

PH10M iQ PLUS is supplied with a calibration file that is created during manufacture
This calibration file is then applied by the probe routine on the CMM *
Following a quick initial calibration procedure, PH10M iQ PLUS allows the user to operate the head / probe combination in every orientation possible without recalibration
PH10M iQ PLUS increases throughput by reducing calibration overhead
Scanning probes can only be used in traditional PH10 mode with PH10M iQ PLUS; touch-trigger probes can use the inferred qualification method

Length	117 mm (4.6 in)
Width	60 mm (2.44 in)
Weight	645 g (22.07 oz)
Probe mounting	Renishaw autojoint (multiwire) M8 threaded probes can be used with a PAA probe adaptor
Head mounting	Shank to suit CMM
Suitable controller	PHC10-3 PLUS
Angular movement	A-axis: 0° to 105° in 7.5 steps B-axis: 0° to 180° in 7.5 steps
Total number of positions	720

* Must be supported by application software

More detail about MSP Metrology (M) Sdn Bhd