Description

Schneider Electric PowerLogic ION7400 / ION7000 Series

PowerLogic ION7400 Advanced Utility Power Quality Meters

Schneider Electric PowerLogic ION7400 Series meters are advanced utility power quality and revenue-grade meters for transmission networks, distribution networks, substations, main incomers, utility feeders, end-feeder monitoring and critical electrical network points.

The ION7400 Series combines high-accuracy three-phase metering, power quality compliance, waveform capture, disturbance direction detection, digital fault recording, ION framework flexibility, multi-protocol communication and modular installation options. It is available in Essential, Standard and Advanced feature sets, with panel-mounted, DIN rail, remote-display, low-voltage DC, MID/MIR and RMICAN variants.

Series PowerLogic ION7400 / ION7000 family

Feature Sets Essential / Standard / Advanced

Applications Revenue, utility feeder, PQ compliance, fault recording

Integration Ethernet, RS485, IEC 61850, Modbus, DNP3, IoTWatt 4.0

Product Overview

The PowerLogic ION7400 Series is designed for advanced utility metering and power quality monitoring. It is suitable for substations, grid interface points, main utility incomers, critical feeders, generator export points, renewable generation connections and high-value electrical distribution networks.

Unlike basic power meters, the ION7400 provides advanced diagnostics for power quality and network events. It supports power quality compliance monitoring, transformer and line loss compensation, instrument transformer correction, disturbance direction detection, ION framework customization, advanced logging and flexible communication with power monitoring software or SCADA systems.

Positioning: Use ION7400 where high-accuracy energy measurement, utility-grade power quality monitoring, feeder event analysis, revenue metering support and advanced communication flexibility are required.

Typical ION7400 Monitoring Architecture

ION7400 meters are installed at utility and critical electrical points. Data can be sent through Ethernet, onboard RS485, optional 4-wire RS485 or optional fiber Ethernet to EcoStruxure Power Monitoring Expert, Power Operation, SCADA, EMS, BMS, utility systems or IoTWatt 4.0.

1 Utility / Substation Point

2 ION7400 Meter

3 PQ + Revenue Data

4 PME / SCADA / IoTWatt

5 Reports + Root Cause

ION7400 Feature Set Selection

The ION7400 Series is available in three feature levels. The correct level depends on whether the project requires basic advanced utility metering, stronger power quality analysis, or full advanced PQ capability.

Feature Set	Part Number Pattern	Main Positioning	Typical Use
ION7400 Essential	ION74xxE	Essential feature set for advanced utility metering at lower entry cost.	Feeder metering, substation monitoring, high-accuracy metering, basic PQ visibility and utility communication.
ION7400 Standard	ION74xx	Standard feature set for utility and power quality monitoring.	Revenue metering support, feeder monitoring, network monitoring, PQ reporting and SCADA / PME integration.
ION7400 Advanced	ION74xxA	Advanced feature set for deeper power quality and diagnostic applications.	Substation PQ monitoring, disturbance analysis, digital fault recording, grid interface monitoring and critical feeder event review.

ION7400 Variant Part Numbers and Features

The table below lists the main ION7400 meter variants. Select the part number based on feature set, mounting format, display requirement, control power and certification requirement.

Commercial Reference	Feature Set	Mounting / Display	Control Power / Approval	Main Features	Recommended Selection Use
METSEION7400E	Essential	Panel-mounted meter with integrated display	Standard control power	ION7400 Essential feature set, integrated display, optical port and 2 energy pulse LEDs.	Entry-level ION7400 panel meter where local display is required.
METSEION7400	Standard	Panel-mounted meter with integrated display	Standard control power	ION7400 Standard feature set, integrated display, optical port and 2 energy pulse LEDs.	General utility feeder, revenue support and power quality monitoring with local display.
METSEION7400A	Advanced	Panel-mounted meter with integrated display	Standard control power	ION7400 Advanced feature set, integrated display, optical port and 2 energy pulse LEDs.	Best panel-mount option for advanced PQ monitoring and event analysis.
METSEION7410E	Essential	Panel-mounted meter with integrated display	20–60 Vdc low-voltage DC control power	Essential feature set with low-voltage DC auxiliary power input.	Substation or DC control power panels requiring Essential ION7400 functionality.
METSEION7410	Standard	Panel-mounted meter with integrated display	20–60 Vdc low-voltage DC control power	Standard feature set with low-voltage DC auxiliary power input.	Standard utility metering where the panel uses 24 Vdc / 48 Vdc auxiliary supply.
METSEION7410A	Advanced	Panel-mounted meter with integrated display	20–60 Vdc low-voltage DC control power	Advanced feature set with low-voltage DC auxiliary power input.	Advanced PQ monitoring in substations or DC control power systems.
METSEION7403E	Essential	DIN rail-mounted meter, no display	Standard control power	Essential DIN rail utility meter base. Can be connected to a remote display.	Remote monitoring cabinet where no local display is required at the meter body.
METSEION7403	Standard	DIN rail-mounted meter, no display	Standard control power	Standard DIN rail utility meter base. Can be connected to a remote display.	DIN rail metering panel for utility monitoring and SCADA / PME integration.
METSEION7403A	Advanced	DIN rail-mounted meter, no display	Standard control power	Advanced DIN rail utility meter base. Can be connected to a remote display.	Advanced DIN rail utility meter for PQ analysis and fault recording applications.
METSEION7413E	Essential	DIN rail-mounted meter, no display	20–60 Vdc low-voltage DC control power	Essential DIN rail meter with LVdc control power. Can be connected to a remote display.	DC control power cabinet where remote display is optional.
METSEION7413	Standard	DIN rail-mounted meter, no display	20–60 Vdc low-voltage DC control power	Standard DIN rail meter with LVdc control power. Can be connected to a remote display.	Utility or substation panel with low-voltage DC auxiliary supply.
METSEION7413A	Advanced	DIN rail-mounted meter, no display	20–60 Vdc low-voltage DC control power	Advanced DIN rail meter with LVdc control power. Can be connected to a remote display.	Advanced PQ and event monitoring in DC-powered utility panels.
METSEION7404E	Essential	DIN rail-mounted meter with remote display	Standard control power	Essential DIN rail utility meter base packaged with remote display.	Use where the meter is DIN mounted but local panel-front display is required.
METSEION7404	Standard	DIN rail-mounted meter with remote display	Standard control power	Standard DIN rail utility meter base packaged with remote display.	General utility metering with separated meter body and panel-front display.
METSEION7404A	Advanced	DIN rail-mounted meter with remote display	Standard control power	Advanced DIN rail utility meter base packaged with remote display.	Advanced PQ monitoring where remote display is required.
METSEION74001E	Essential	Panel-mounted meter with integrated display	MID/MIR calibrated	Essential panel-mount meter calibrated for Measuring Instruments Directive / UK Measuring Instruments Regulations applications.	UK / EU projects requiring MID/MIR calibrated metering.
METSEION74001	Standard	Panel-mounted meter with integrated display	MID/MIR calibrated	Standard panel-mount meter calibrated for MID/MIR applications.	UK / EU revenue or billing-related applications requiring MID/MIR calibration.
METSEION74001A	Advanced	Panel-mounted meter with integrated display	MID/MIR calibrated	Advanced panel-mount meter calibrated for MID/MIR applications.	UK / EU projects requiring both advanced PQ functionality and MID/MIR calibration.
METSEION74101	Standard	Panel-mounted meter with integrated display	20–60 Vdc control power, MID/MIR calibrated	Standard panel mount meter with LVdc control power and MID/MIR calibration.	UK / EU applications requiring MID/MIR calibration and low-voltage DC auxiliary power.
METSEION74003E	Essential	Panel-mounted meter with integrated display	RMICAN ready / Canada only	Essential panel-mount meter with sealable hardware lock. Meter is not sealed.	Canada-specific metering application requiring sealable hardware lock.
METSEION74003	Standard	Panel-mounted meter with integrated display	RMICAN ready / Canada only	Standard panel-mount meter with sealable hardware lock. Meter is not sealed.	Canada-specific utility or revenue metering support.
METSEION74004E	Essential	Panel-mounted meter with integrated display	RMICAN sealed / Canada only	Essential panel-mount meter with sealable hardware lock and factory physical seal.	Canada-specific sealed metering requirement.
METSEION74004	Standard	Panel-mounted meter with integrated display	RMICAN sealed / Canada only	Standard panel-mount meter with sealable hardware lock and factory physical seal.	Canada-specific sealed metering application.

Selection note: For Malaysia projects, the most common variants are normally Standard or Advanced versions with panel mount, DIN rail, or DIN rail with remote display. MID/MIR and RMICAN variants are mainly for markets or projects that specifically require those certifications.

ION7400 Accessories and Option Modules

The ION7400 platform supports remote display and communication / I/O expansion modules. These are important for retrofit projects, utility panels, substations and installations requiring additional digital or analog interfaces.

Commercial Reference	Accessory / Module	Main Features	Recommended Use
METSEPM89RD96	Remote display	Remote display for DIN meter only, with display cable and mounting hardware.	Use with DIN rail ION7400 variants where panel-front display is required.
METSEPM89M2600	Digital I/O option module	6 digital status / counter inputs and 2 relay outputs.	Use for breaker status, external alarms, pulse counting, status input, alarm output or control-related signals.
METSEPM89M0024	Analog I/O option module	4 analog inputs and 2 analog outputs.	Use for process signal integration, BMS interface or analog retransmission.
METSEPMRS4854W	4-wire RS485 option module	Adds 4-wire RS485 support. Onboard 2-wire RS485 is disabled when this module is used.	Useful for retrofit projects replacing legacy 4-wire RS485 meters.
METSEPMFIBER	Fiber Ethernet option module	Fiber Ethernet communication option for isolated or longer-distance communication.	Recommended for substations, MV rooms, remote panels or electrically noisy environments.
METSEPM8000SK	Voltage and current sealing kit	Sealing kit for controlled access to voltage and current terminals.	Use where metering integrity or tamper control is required.
METSEPMAK	Mounting adapter kit	Mounting adapter kit for remote display and DIN meter.	Use where remote display and DIN meter require specific mounting arrangement.

Option module note: A maximum of four optional modules can be connected to the meter. Only one Fiber Ethernet module and one 4-wire RS485 module are supported per meter.

Common ION7400 Series Features

Advanced Utility Metering

Designed for transmission, distribution, substation, utility feeder and revenue metering support applications.

Class 0.2S Active Energy

Supports high-accuracy active energy measurement suitable for important utility and feeder monitoring points.

IEC 61000-4-30 Power Quality

Supports power quality monitoring for voltage events, harmonics and compliance-related visibility depending on feature set.

Disturbance Direction Detection

Helps identify whether a power quality event is upstream or downstream of the meter.

Digital Fault Recording

Provides event and waveform information useful for feeder fault and disturbance investigation.

ION Frameworks

Supports customizable ION frameworks for logic, calculations, totalization, alarming, data handling and application flexibility.

Standard Meter I/O

Includes standard digital status / counter inputs and KY energy pulse output on the meter base.

Multiple Protocols

Supports communication protocols such as Modbus, ION, DNP3, IEC 61850, DLMS / COSEM and BACnet/IP depending on configuration.

Modular Expansion

Supports remote display, digital I/O, analog I/O, 4-wire RS485 and Fiber Ethernet option modules.

Applications

Substation Feeder Metering

Monitor feeders at substations with accurate energy, power and power quality data.

Revenue Metering Support

Use high-accuracy metering, sealable variants and compensation functions where billing-quality data is required.

Power Quality Monitoring

Monitor sags, swells, harmonics, flicker and other power quality events depending on feature set.

Cause Analysis

Use waveform capture, event logs and disturbance direction detection to support root cause analysis.

End Feeder Line Monitoring

Monitor remote feeders and downstream line behaviour where utility network visibility is required.

Digital Fault Recording

Use event and waveform data to support fault recording and post-event engineering review.

Renewable Interconnection

Useful at solar, wind, BESS or distributed generation connection points where PQ and export / import measurement are required.

Critical Infrastructure

Suitable for airports, hospitals, data centres, water treatment plants and large industrial facilities.

IoTWatt 4.0

Use ION7400 data for advanced dashboards, PQ event visibility, digital energy audit evidence and EECA reporting support.

Technical Characteristics

Item	ION7400 Series Capability
Meter Type	Advanced utility power quality and energy meter.
Measurement Method	True RMS measurement up to 512 samples per cycle.
Accuracy	Class 0.2 current / voltage / active power; Class 0.2S active energy, depending on rated input and standard.
Voltage Input Range	Specified accuracy voltage range from 57 V L-N / 100 V L-L up to 400 V L-N / 690 V L-L.
Current Inputs	Rated nominal current options for 1 A, 5 A and 10 A variants depending on standard / market configuration.
Power Supply	AC/DC control power variants and 20–60 Vdc low-voltage DC variants are available.
Meter Base I/O	3 form A digital inputs and 1 form A KY solid-state digital output.
Optional Digital I/O	6 digital inputs and 2 Form C relay outputs through option module.
Optional Analog I/O	4 analog inputs and 2 analog outputs through option module.
Communication	Ethernet, RS485, optical port, USB and optional communication modules depending on configuration.
Option Modules	Remote display, digital I/O, analog I/O, 4-wire RS485 and Fiber Ethernet options.
Standards	Supports standards including ANSI C12.20, EN 50160, IEC 61000-4-7, IEC 61000-4-15, IEC 61000-4-30, IEC 61557-12, IEC 61850, IEC 62053-22, IEC 62586 and IEEE 519 depending on application and configuration.

Selection Guide

Requirement	Recommended ION7400 Selection	Reason
Standard panel-mounted installation with local display	METSEION7400 / METSEION7400A	Integrated display panel meter for switchboard or substation panel installation.
Lower-cost entry into ION7400 platform	METSEION7400E or METSEION7403E	Essential feature set for projects that need ION7400 architecture with reduced feature requirement.
Advanced PQ analysis and digital fault recording	Advanced variants ending with A	Advanced feature set gives stronger diagnostic capability for critical power quality applications.
DIN rail metering cabinet without display	METSEION7403 / METSEION7403A	DIN rail meter base for remote monitoring cabinet or gateway panel installation.
DIN rail meter with local operator display	METSEION7404 / METSEION7404A	Packaged remote display gives local panel-front visibility while keeping meter body on DIN rail.
Low-voltage DC auxiliary supply	METSEION7410 / METSEION7413 / Advanced A versions	20–60 Vdc control power variants are suitable for substation DC systems.
MID/MIR requirement	METSEION74001 / METSEION74001A	Use where UK / EU MID/MIR calibrated metering is required.
Canada RMICAN requirement	METSEION74003 / METSEION74004 variants	Use only for Canada-specific RMICAN ready or sealed metering requirements.
Legacy 4-wire RS485 retrofit	Add METSEPMRS4854W	Allows replacement of legacy 4-wire RS485 meters without rewiring the communication architecture.
Fiber communication	Add METSEPMFIBER	Useful for substations, long-distance communications and electrically isolated network design.

Integration with IoTWatt 4.0

IoTWatt 4.0 can use ION7400 meter data for high-quality energy and power quality dashboards, digital energy audit evidence, voltage event review, feeder analytics, demand monitoring, EECA reporting and advanced electrical network monitoring.

Monitor kWh, kW, kvar, kVA, voltage, current, power factor, frequency, demand and harmonic values.
Use PQ events, waveform captures and event logs for voltage sag / swell and disturbance review.
Use disturbance direction detection to support upstream / downstream event investigation.
Use high-accuracy energy data for feeder baselines, cost allocation and performance tracking.
Integrate through Ethernet, RS485, 4-wire RS485 option module or Fiber Ethernet option module.
Use ION7400 data for digital energy audit, EECA reporting and continuous electrical performance monitoring.

Integration note: For IoTWatt 4.0, Ethernet-based ION7400 integration is preferred where site network access is available. RS485 or 4-wire RS485 integration can be used through compatible gateways such as RS2LAN, RS2MQTT or RS2WLAN. For waveform and event-heavy applications, the communication design should consider polling interval, storage and event retrieval requirements.

Recommended Deployment Checklist

Confirm required feature set: Essential, Standard or Advanced.
Confirm installation type: panel mount, DIN rail, or DIN rail with remote display.
Confirm control power requirement: standard AC/DC or 20–60 Vdc low-voltage DC.
Confirm whether MID/MIR or RMICAN certification is required.
Confirm voltage level, wiring configuration and PT / VT requirement.
Confirm CT ratio, CT secondary, CT class, burden and CT polarity.
Confirm power quality requirement: EN 50160, IEC 61000-4-30, IEEE 519, disturbance direction, waveform capture or digital fault recording.
Confirm communication requirement: Ethernet, RS485, 4-wire RS485 or Fiber Ethernet.
Confirm required option modules: digital I/O, analog I/O, remote display, sealing kit or mounting adapter.
Confirm time synchronization requirement for event sequence analysis.
Confirm integration with EcoStruxure PME, Power Operation, EMS, BMS, SCADA or IoTWatt 4.0.
Test phase sequence, CT direction, event capture, communication, time sync, alarms and logs during commissioning.

ION7400 / ION7000 Variant Selection, Supply and IoTWatt 4.0 Integration

Saturn Pyro supports Schneider Electric PowerLogic ION7400 / ION7000 Series meters for variant selection, utility feeder metering, revenue metering support, power quality monitoring, digital fault recording, RS485 / Ethernet / Fiber integration, EcoStruxure PME connectivity, SCADA integration and IoTWatt 4.0 digital energy audit projects in Malaysia.

Enquire Now

More detail about Saturn Pyro Sdn Bhd