G110512 Right Hand Tube – Stabilizer Cylinder is a hydraulic cylinder tube used for the right hand stabilizer cylinder on selected CASE 580 backhoe loader models. This tube is an important part of the stabilizer hydraulic cylinder system, helping the stabilizer leg move smoothly and support the machine firmly during operation.
The stabilizer cylinder tube works together with the cylinder rod, piston, gland, seal kit, and hydraulic oil to control lifting, lowering, and pressure holding. When the stabilizer is being used, the cylinder tube must hold hydraulic pressure properly so the machine can stay stable during digging, lifting, and backhoe operation.
If the tube is worn, scratched, dented, rusty, leaking, or damaged internally, the stabilizer cylinder may become weak, slow, unstable, or unable to hold pressure properly. In some cases, the seal kit may continue to leak even after replacement if the inner surface of the tube is already damaged.
Replacing a damaged stabilizer cylinder tube helps restore hydraulic performance, reduce oil leakage, improve stabilizer operation, and protect the seal kit, piston, gland, rod, and other related cylinder parts.
Suitable Models:
CASE 580 K
CASE 580 K Series 2
Product Details:
Part Number: G110512
Product Name: Right Hand Tube – Stabilizer Cylinder
Product Type: Cylinder Tube / Hydraulic Tube
Application: Stabilizer Cylinder
Position: Right Hand
Size: 107.82mm ID x 780mm L
Machine Type: CASE Backhoe Loader
Condition: New Replacement Part
Common Symptoms:
Stabilizer cylinder oil leakage
Stabilizer leg becomes weak or slow
Cylinder cannot hold pressure properly
Cylinder tube is scratched, dented, or damaged
Seal kit leaks again after replacement
Machine becomes unstable during operation
Hydraulic movement is not smooth
Recommended Inspection:
Before installation, check the cylinder rod, piston, gland, seal kit, bushings, pins, and hydraulic oil condition. If related components are worn or damaged, replacing them together with the cylinder tube is recommended for better performance and longer service life.
G110512 Right Hand Tube – Stabilizer Cylinder 是用于指定 CASE 580 挖掘装载机型号右边 stabilizer 油缸的液压油缸筒。这个部件是 stabilizer hydraulic cylinder system 的重要组成部分，主要帮助支脚油缸顺畅升降，并在机器工作时保持稳定。
Stabilizer 油缸筒会配合 cylinder rod、piston、gland、seal kit 和液压油一起工作，帮助油缸进行升降动作和保持液压压力。当机器进行挖掘、支撑或后臂操作时，stabilizer 油缸必须能够正常保持压力，机器才会更加稳定。
如果油缸筒出现磨损、刮花、凹陷、生锈、漏油或内部损坏，stabilizer 油缸可能会变得无力、动作变慢、不稳定，或无法正常保持压力。有时候即使更换了 seal kit，如果油缸筒内部表面已经损坏，还是可能继续漏油。
更换损坏的 stabilizer 油缸筒，可以帮助恢复液压性能，减少漏油问题，改善支脚油缸运作，并保护 seal kit、piston、gland、rod 和其他相关油缸零件。
适合车型：
CASE 580 K
CASE 580 K Series 2
产品资料：
零件号码：G110512
产品名称：Right Hand Tube – Stabilizer Cylinder
产品类型：Cylinder Tube / Hydraulic Tube / 油缸筒
用途：Stabilizer Cylinder
位置：Right Hand / 右边
尺寸：107.82mm ID x 780mm L
机械类型：CASE Backhoe Loader
状态：New Replacement Part
常见损坏症状：
Stabilizer 油缸漏油
支脚油缸动作变慢或无力
油缸不能正常保持压力
油缸筒刮花、凹陷或损坏
Seal kit 更换后再次漏油
机器工作时不够稳定
液压动作不顺畅
建议检查：
安装前建议检查 cylinder rod、piston、gland、seal kit、bushing、pin 和液压油状况。如果相关零件已经磨损或损坏，建议和油缸筒一起更换，这样效果更好，也能延长使用寿命。
More detail about HIAP SOON PARTS SUPPLIES SDN BHD
