Description
IMITOS LED Driver TX-0912 9W-12W Power Supply
The IMITOS LED Power Supply TX-0912 is a professional-grade, high-efficiency constant current 300mA LED driver engineered for 9W to 12W LED lighting fixtures. Operating seamlessly within Malaysia’s standard electrical grid (100-240VAC), this transformer ensures continuous, flicker-free performance for residential ceiling downlights and commercial spotlights. Built with high thermal tolerance (Ta: 45°C/ Tc: 75°C), it guarantees extended lifespan and stable power delivery for sensitive LED chips.
Full Description:
Are your ceiling downlights blinking, flickering, or dimming unexpectedly? The primary cause is often a failing or low-quality transformer. The IMITOS LED Power Supply 9-12×1W (Model: TX-0912) serves as the ultimate premium replacement driver designed to restore your interior illumination back to showroom standards. Engineered explicitly to cope with localized voltage variations across Malaysia, this power supply bridges the gap between raw grid electricity and delicate semiconductor components.
Advanced Constant Current Technology (300mA)
Unlike cheap constant voltage alternatives that degrade LED chips over time, the IMITOS TX-0912 provides a precise Constant Current output of DC300mA within a flexible voltage window of 27-42V. This dynamic voltage range makes it perfectly optimized to power 9 to 12 individual 1-Watt LED beads connected in a series circuit (9-12 × 1W). By regulating the electrical current perfectly to 300mA, the driver prevents current spikes, manages heat generation at the light source, and completely eliminates visual micro-flicker—creating a safer, more comfortable eye environment for your living room, kitchen, or retail office space.
Wide Voltage Input & Robust Malaysian Grid Compatibility
Electrical stability shouldn't be a luxury. The primary input (PRI) of the IMITOS TX-0912 handles a universal wide-voltage input spectrum of 100-240V AC at 50/60Hz. Whether your premises are subject to standard residential single-phase power setups or light commercial three-phase supply lines, this driver balances incoming power seamlessly. It shrugs off minor peak-hour voltage drops and minor surges common in urban and suburban distribution lines, maintaining uniform light distribution without skipping a beat.
Excellent Thermal Engineering for Plaster Ceilings
Plaster ceilings in Malaysia act as extreme heat traps, especially during hot afternoons. A driver with poor thermal limits is bound to trigger safety shutdowns or burn out early. IMITOS addresses this issue through rigorous industrial thermal design parameters:
-
Ambient Temperature Max (Ta): 45°C- Capable of operating smoothly in high-ambient tropical temperatures and restricted dead-air ceiling spaces.
-
Case Temperature Max (Tc): 75°C- Heavy-duty outer casing material engineered to tolerate up to 75°C internal thermal thresholds safely without warping, melting, or presenting fire hazards.
Clean Architecture & Easy Installation
Designed with convenience in mind for local contractors, wiremen, and DIY homeowners alike, the TX-0912 boasts a highly compact structural footprint. It slips cleanly into tight downlight ceiling cutouts, matching perfectly with existing round or square recessed eyeball casing units. Color-coded input and output wire leads facilitate straightforward terminal block connections, significantly cutting down on installation time.
Specification:
- Model: TX-0912
- Power: 9-12×1W
- PRI: 100-240VAC 50/60Hz
- SEC: Constant Current: DC300mA 27-42v
- Ta: 45°C
- Tc: 75°C
Q1: What is the best replacement LED driver for a blinking ceiling downlight in Malaysia?
A: The IMITOS TX-0912 LED driver is an ideal replacement for blinking 9W to 12W downlights. Blinking usually indicates a failed transformer; changing it out for a constant current 300mA driver resolves the issue instantly.
Q2: Can I use the IMITOS TX-0912 power supply for a 12W LED downlight?
A:Yes. The IMITOS TX-0912 is rated for
9–12 × 1W, meaning it natively supports light loads between 9 Watts and 12 Watts while sustaining a steady 300mA current flow.
Q3: What does "SEC: DC300mA 27-42V" mean on an LED driver specification?
A: This denotes the Secondary output. The driver converts incoming AC household power into a safe Constant Current of 300mA, automatically modulating the output voltage between 27V and 42V DC based on the connected LED array load.
Q4: Why are my LED lights flickering, and how does the IMITOS TX-0912 fix it?
A: Flickering happens due to unstable voltage output from generic drivers. The IMITOS TX-0912 regulates power fluctuations through a clean 300mA constant current feed, smoothing out power ripples to eliminate flicker completely.
Q5: Is the IMITOS TX-0912 LED power supply compatible with Malaysia's standard electricity voltage?
A: Absolutely. It has an input voltage rating (PRI) of 100-240VAC at 50/60Hz, making it fully compatible with Malaysia's nominal 240V domestic power grid supply.
Q6: What do the Ta and Tc ratings mean on the IMITOS TX-0912 driver casing?
A:Ta (45°C) is the maximum safe room/ambient air temperature the driver can operate in. Tc (75°C) is the highest safe temperature the driver's physical outer shell should reach under full operational load.
Q7: Can I use a constant current driver for constant voltage LED light strips?
A:No. Constant current drivers like the IMITOS TX-0912 (300mA) are designed specifically for high-power LED beads like downlights or spotlights.
LED strip lights typically require constant voltage drivers (e.g., 12V or 24V DC).
Q8: How many 1W LED chips can the IMITOS TX-0912 power supply support?
A: It is explicitly rated for 9 to 12 pieces of 1-Watt LED chips connected in a series loop, operating comfortably within its 27V to 42V window.
Q9: Where can I buy original IMITOS LED power supplies and drivers in Selangor/KL?
A: Original IMITOS lighting accessories can be purchased through authorized electrical supply wholesalers in Selangor, authorized lighting showrooms, or verified e-commerce platforms like Lazada and Shopee Malaysia.
Q10: Is it safe to install the IMITOS TX-0912 inside a sealed plaster ceiling?
A: Yes, the IMITOS TX-0912 features a high thermal resistance rating (Ta: 45°C and Tc: 75°C), which prevents overheating when placed inside standard domestic plaster ceiling gaps.
More detail about E S L Lighting (M) Sdn Bhd
Malaysia
