Description
IMITOS LED Driver 4-7W AC85-265V Power Supply
The IMITOS LED Driver 4-7W is a premium, high-efficiency constant current replacement transformer engineered specifically for Malaysia's residential and commercial ceiling downlights. Designed to power Epistar LED chips flawlessly, it converts input voltages of AC85-265V into a stabilized DC15-29V 300mA output. Featuring a superior Power Factor of >0.9 and highly optimized thermal thresholds (Ta: 45°C, Tc: 75°C),this lighting transformer permanently resolves common issues like flickering, buzzing, or sudden light failure, extending the overall lifespan of your home lighting systems.
Full Description:
When a ceiling downlight or eyeball spotlight starts flickering or fails to turn on entirely, many Malaysian homeowners assume the bulb itself is broken. However, in more than 90% of cases, the true culprit is a burned-out or cheap, unbranded driver. The IMITOS LED Driver 4-7W is a commercial-grade, highly reliable replacement LED driver designed to restore your lighting fixtures back to peak performance without needing to buy a completely new lamp set.Whether you are executing a DIY home maintenance fix or managing a commercial property upgrade across Kuala Lumpur and Selangor, this electronic power supply acts as the reliable backbone for 4W, 5W, and 7W light fixtures.
Engineered for the Malaysian Climate and Smart Power Grids
Electrical fluctuations are relatively common, but IMITOS mitigates these hazards seamlessly. This LED driver 4-7W features a broad input range of AC85-265V (50/60Hz), making it highly resilient to local voltage drops and unexpected surges.Furthermore, Malaysia’s tropical heat can trap excessive thermal energy inside tight plaster ceiling boards. To counter this, the IMITOS driver boasts an ambient operating temperature rating (Ta) of 45°C and a maximum casing thermal threshold (Tc) 75°C. Its engineered housing layout dissipates heat effectively, preventing early component decay and ensuring safety inside your ceiling spaces.
High-Efficiency Output & Seamless Epistar Compatibility
Equipped with absolute technical precision, this unit outputs a stable DC15-29V at 300mA constant current. It is optimized explicitly for world-class Epistar LED chips, ensuring uniform brightness, correct lumen rendering, and zero color degradation over time.With an advanced Power Factor (PF) of >0.9, this driver ensures minimal electricity waste, converting power directly into pure, clear illumination. Choosing a high-PF driver helps keep your home eco-friendly while subtly preventing micro-spikes on your monthly Tenaga Nasional Berhad (TNB) electricity bills.
Easy 2-Step Step DIY Installation Guide
-
Safety First: Ensure your primary household circuit breaker switch is completely turned off before touching any wiring elements.
-
Wire Matching: Connect the input side (AC wires) to your household mains power supply line, and seamlessly snap-connect or wire the output side (DC 300mA terminal plug) to your existing Epistar LED light board module.
Specification:
- Model: 4-7W
- Input: AC85-265V 50/60Hz
- Output: DC15-29V 300mA
- Power Factor: >0.9
- Ta: 45°C
- Tc: 75°C
Q1: Why is my LED downlight flickering in my house in Malaysia?
A: LED downlights typically flicker because the integrated electronic driver is failing or struggling to maintain a steady output current due to heat buildup or low-quality capacitors. Replacing it with a steady, high-quality component like the IMITOS LED Driver 4-7W 300mA stops the flickering instantly.
Q2: Can I use a 4-7W LED driver to replace a 5W LED downlight transformer?
A: Yes, you can. A 4-7W driver is designed to automatically adjust its output voltage within its rated range (DC15-29V) to supply the constant 300mA current required by any LED load between 4 Watts and 7 Watts safely.
Q3: What does a 300mA constant current LED driver mean?
A: Constant current means the driver alters its output voltage dynamically to ensure that the electrical current flowing through the LED circuit remains locked at exactly 300mA. This strict control prevents your Epistar LED chips from overheating or burning out.
Q4: Is a Power Factor (PF) >0.9 good for an LED driver?
A: Yes, a Power Factor greater than 0.9 is excellent. It signifies that over 90% of the electrical power pulled from your TNB wall grid is successfully transformed into real, working energy for your light, resulting in minimal electrical waste.
Q5: What are the Ta and Tc temperatures on the IMITOS driver casing?
A:Ta (45°C) represents the maximum ambient environmental temperature the driver can safely operate in, while Tc (75°C) represents the maximum safe physical surface temperature of the driver's plastic casing during active use.
Q6: Can this LED driver work with other LED brands besides Epistar?
A: Absolutely. While optimized for Epistar chips, it works perfectly with any LED brand or downlight panel, provided the light module requires a 300mA input current and falls within the 4-7W power bracket.
Q7: How do I know if my ceiling light transformer is broken?
A: Classic indicators of a faulty driver include a completely dead light that refuses to turn on, a light that blinks rhythmically like a strobe, or a loud, high-pitched buzzing sound emanating from your ceiling board.
Q8: Is the IMITOS LED Driver 4-7W easy to install as a DIY project?
A: Yes, it features standard incoming AC input wires and a standard male/female plug on the DC output end, allowing for straightforward, plug-and-play swaps with older, faulty transformers.
Q9: Where can I buy original IMITOS LED components in Malaysia?
A: Original IMITOS lighting gear can be readily acquired through certified engineering distributors based in Selangor/KL, local hardware stores, or via reputable digital storefronts on Shopee and Lazada Malaysia.
Q10: Is this driver dimmable?
A: This standard model is a non-dimmable constant current unit. It should only be paired with standard on/off wall switches, not dimming knob controls.
More detail about E S L Lighting (M) Sdn Bhd
Malaysia
