Manual torque tool management / built-in battery type
For managing various manual torque drivers and wrenches
It works with a personal computer or PLC to manage torque measurement more highly.
For managing manual torque drivers and wrenches.
The “DIS series” has become easier to use and has higher performance.
Command list
Clear signal: Clears the display and outputs the held numerical value as data and saves it in memory.
Measurement mode: Change the measurement mode.
Measurement channel: Change individual channels for which conditions such as pass / fail judgment are set.
Peak hold upper limit: Change the pass / fail judgment upper limit of the current channel.
Peak hold lower limit: Change the pass / fail judgment lower limit of the current channel.
Peak down lower limit: Change the peak down judgment start lower limit of the current channel.
Real-time output lower limit: Changed the output lower limit of real-time output.
Auto clear time: Changed the time to automatically clear after the measurement is completed.
Buzzer notification: Changed the buzzer notification method.
| Specification | WDISR-IP05 | WDISR-IP5 | WDISR-IP50 | WDISR-IP200 | WDISR-IP500 | WDISR-IP1500 | |
| Applications | It is a torque measuring equipment to measure the tightening torque of tightening tools (torque screwdriver, torque wrench, etc.) in screw tightening work. | ||||||
| Power Supply | Internal battery (12 hours continuous operation time, 3 hours charging time) | ||||||
| Rate Input Voltage | 12V DC | ||||||
| Measuring Range (At time of Track) |
2.0 ~ 500 mNem
|
0.020 ~ 5 Nem
|
0.20 ~ 50 Nem
|
2.0 ~ 200 Nem
|
2.0 ~ 500 Nem
|
20 ~ 1500 Nem
|
|
| kgf-cm lbf-in mN-m cN-m |
kgf-cm |
kgf-cm |
kgf-m |
||||
| Accuracy | ±0.5% (499 or less digit ±3 digit) *Maintain a constant temperature during measurement |
||||||
| Sampling Rate | 1000 data / sec | ||||||
| Display | The 4 figures digital display of LCD | ||||||
| The measurement direction | CW-CCW (right and left) | ||||||
| Measuring mode |
PP Peak hold | Measure the peak torque (with data output) | |||||
| PD Peak down | Measure the first peak torque (with data output) | ||||||
| C Real-time output |
The data output cycle is approximately 180 data / 1 second. (with data output) |
||||||
| TR Track | Mainly used for calibration. (without data output) | ||||||
| Data Output | Wired (ASCII format) | ||||||
| Memory Size | 800 data | ||||||
| Auto-power Off | Power off after 10 minutes of non-use | ||||||
| Accessories, Attachments | Detector (refer table below) | ||||||
| Detector cable | |||||||
| AC adaptor | |||||||
| Rubber foot | |||||||
| Result of calibration, Certification on calibration, Traceability system figure | |||||||
| – | – | – | – | – | T-knob x 2 | ||
| Model | IP05/5 | IP50 | IP200 | IP500 | IP1500 |
 |
|||||
| A Detector Shape | ∅40mm | ∅50mm | ∅60mm | ∅80mm | ∅100mm |
| B Height | 41.2mm | 63mm | 79mm | 98mm | 102.5mm |
| C Thickness | 5mm | 10mm | 15mm | 15.5mm | 33mm |
| D Flange Size | ∅60mm | ∅90mm | ∅108mm | ∅140mm | ∅170mm |
| E Hole Position | ∅50mm | ∅74mm | ∅90mm | ∅116mm | ∅140mm |
| F Hole Size | ∅4.2mm (Every 120°) |
∅6.3mm (Every 120°) |
∅8.3mm (Every 120°) |
∅10.5mm (Every 120°) |
∅13mm (Every 60°) |
| G Socket | 6.35sq | 9.5sq | 12.7sq | 19sq | 25.4sq |
| Weight | Around 200g | Around 600g | Around 1kg | Around 2.5kg | Around 7.2kg |
Contact us today to inquire about the WDISR-IP series and enhance your manual torque tool management capabilities.
Malaysia
