Replacement for Parker 924449 Hydraulic Filter Element

Replacement for Parker 924449 Hydraulic Filter Element

Category: Parker Hydraulic oil filter Available
For more information, visit our official website at btlasfilters.com

Description

Will this fit my housing without modification?

Yes. Dimensionally identical to the Parker 924449 — same OD, length, flow direction, and double open-end configuration. Drops straight in with no modification required.

What is the difference between absolute (beta rated) and nominal micron rating?

A nominal rating captures roughly 50–90% of particles at the stated size — and varies between manufacturers. An absolute rating means 99.5%+ capture efficiency, verified by ISO 16889 multi-pass testing of the media. This filter is 3 micron.

Is the filtration performance the same as OEM filters?

Yes — independently verified. SONA's 3 micron microglass media is tested to ISO 16889 with a Beta ratio of BX = 200, matching or exceeding performance in both efficiency and dirt-holding capacity.
 

How often should I change my hydraulic filter element?

Change the Parker 924449 element when differential pressure reaches 25 PSID, or at your OEM service interval — typically every 500–2,000 operating hours depending on system load and contamination levels. Do not wait until the bypass valve activates.

 

Full Specs

O.D.

3.66"

I.D. Top

1.73"

I.D. Bottom

1.73"

Length Overall

9.29"

Construction Type

Inside-to-Outside flow, Suction Applications, Cellulose, Double Open End

Efficiency

3 micron

Gasket Material

Buna

Wire Support

NA

Max Operating Pressure

73 PSID Collapse

Max Temp

248 Degress F

Weight Each

2.2

Carton Qty

1

Condition

New

More detail about Guanxian Xinhuida Filter Co., Ltd.
Guanxian Xinhuida Filter Co., Ltd.
Guanxian Xinhuida Filter Co., Ltd. Industrial Filters Manufacturer China, Hydraulic & Vacuum Filters Supplier Hebei | Guanxian Xinhuida Filter Co., Ltd.
Contact Us flagMalaysia