Replacement for Parker R921H0403A Hydraulic Filter Element

Replacement for Parker R921H0403A Hydraulic Filter Element

Category: Parker Hydraulic oil filter Available
For more information, visit our official website at btlasfilters.com

Description

Will this fit my housing without modification?

Yes. Dimensionally identical to the Parker R921H0403A — same OD, length, flow direction, and double open-end configuration. Drops straight in with no modification required.

What is the difference between absolute (beta rated) and nominal micron rating?

A nominal rating captures roughly 50–90% of particles at the stated size — and varies between manufacturers. An absolute rating means 99.5%+ capture efficiency, verified by ISO 16889 multi-pass testing of the media. This filter is 3 Micron; B3 = 200, B4.5 = 1000.

Is the filtration performance the same as OEM filters?

Yes — i

How often should I change my hydraulic filter element?

Change the Parker R921H0403A element when differential pressure reaches 25 PSID, or at your OEM service interval — typically every 500–2,000 operating hours depending on system load and contamination levels. Do not wait until the bypass valve activate

ndependently verified. SONA's 3 Micron; B3 = 200, B4.5 = 1000 microglass media is tested to ISO 16889 with a Beta ratio of BX = 200, matching or exceeding performance in both efficiency and dirt-holding capacity.
 

Full Specs

O.D.

1.77"

I.D. Top

1.00"

I.D. Bottom

NA

Length Overall

4.48"

Construction Type

Microglass, Single Open End

Efficiency

3 Micron; B3 = 200, B4.5 = 1000

Gasket Material

Viton

Wire Support

Yes

Max Operating Pressure

3045 PSID Collapse

Max Temp

248 Degress F

Weight Each

2.5

Carton Qty

1

Condition

New

More detail about Guanxian Xinhuida Filter Co., Ltd.
Guanxian Xinhuida Filter Co., Ltd.
Guanxian Xinhuida Filter Co., Ltd. Industrial Filters Manufacturer China, Hydraulic & Vacuum Filters Supplier Hebei | Guanxian Xinhuida Filter Co., Ltd.
Contact Us flagMalaysia