3 light source: visible light, UV and infrared
VLT/UVR/IRR, VLT/UVT/IRT and VLT, three display interfaces are available
Rotatable screen, easy reading
Suitable for testing metalic films and ceramic films
LS163A window film transmission meter is an instrument for measuring the optical properties of uniform and transparent materials such as solar film, glass with film, heat-insulating glass and automobile side windsheild glass. We can select the measurement interface to display the infrared and ultraviolet rejection and transmittance.
LS163A window film transmission meter is mainly suitable for various solar film, glass manufacturers, car 4S shops, car beauty shops and other occasions. In addition to solar film and heat insulation film, it can also be used to measure various stick-film glass, automobile side glass and PC materials.
| Parameter | Value |
|---|---|
| UV Peak wavelength | 365nm |
| IR Peak wavelength | 1400nm |
| Visible light | 380-760nm, conform to the CIE photopic luminosity function |
| Accuracy | ±2% (Colorless and transparent material) |
| Resolution | 0.1% |
| Test Slot | 6mm *58mm (W*D) |
| Dimension | 146 mm ×73 mm ×24 mm (L*W*H) |
| Display | 128*128 Dot matrix LCD |
| Weight | 187g (Include Batteries) |
| Power supply | 4*AAA alkaline batteries |
The solar film transmission meter has only one button. The three test results will be displayed on the interface immediately after putting the materials into the test slot
The LS163A Transmission Meter boasts parallel light path design, with a test slot wide 6mm, the instrument can also test large thickness materials such as car side windshield
The display interface can be rotated in 4 directions adaptively, which is convenient for reading data when testing at different angles
The LS163A solar film transmission meter has real time dynamic calibration function , the meter will make self-calibration after powering on
We can set the display interface as UV and IR rejection rate, light transmission rate or light transmittance
The window film transmission meter has data lock function. Press the "Hold" button after testing, the data will remain on the interface after taking away the tested materials
Malaysia
