CUSTOM AC Clamp Meter C-01S

Basic AC clamp meter.

• It is equipped with a data hold function that can fix and display changing values, and a max hold function that can update and display the maximum value during measurement.
• Equipped with an auto power off function to reduce power consumption.
• Equipped with a backlight function that allows you to check the display even when measuring in dark places.

Part names

Main unit

• ①Clamp sensor
• ②Barrier section
• ③Clamp opening/closing lever
• ④Data hold button
• ⑤MAX hold button
• ⑥Display section
• ⑦Center position mark
• ⑧Range selection switch
• ⑨Backlight button

display

• ① Battery level display
• ②Data hold display
• ③Unit display
• ④Measurement value
• ⑤Max hold display

 

▲Back to top of page

specification

Electrical Performance

	range	resolution	Accuracy *2	frequency
ACA	2 A	0.001 A	±(4.0%rdg + 30dgt)	50 to 60 Hz
	20A	0.01 A	±(3.0%rdg + 20dgt)
	200A	0.1 A	±(2.5%rdg + 20dgt)

*23 ±5°C, 75% RH or less (for sine wave)
*2 The guaranteed accuracy ranges are: 2 A range: 0.200 to 1.999 A (50 to 60 Hz), 20 A range: 2.00 to 19.99 A, 200 A: 20.0 to 199.9 A (50 to 60 Hz).

General specifications

Detection method	Average value method
display	LCD, 2000 count
Range switching	manual
Maximum measurement conductor diameter	φ16 mm
sampling	Approximately 2 times/second
Auto Power Off	Approximately 15 minutes (can be canceled)
Operating temperature and humidity	0 to +30°C, 75% RH or less (no condensation) +30 to +40°C, 50% RH or less (no condensation)
Storage temperature and humidity	-10 to +50°C, 75% RH or less (no condensation)
size	Approx. W 60 × H 158 × D 34 mm
weight	Approximately 170 g (including batteries)
power supply	2 x AAA batteries
battery life	Approximately 400 hours *3
accessories	Storage case, instruction manual
proofreading	Possible
Compliance standards	IEC 61010-1 CAT.II 600VAC, IEC 61010-1 CAT.III 300VAC
JAN	4983621090161

*3 When using alkaline batteries. Heavy use of the backlight will shorten battery life.