CUSTOM Clamp-on digital multimeter MC-02

A digital multimeter with clamps that makes it easy to measure current even in tight spaces.

• Supports measurements of AC voltage, DC voltage, AC current, DC current, resistance, continuity check, diode test, capacitor check, frequency measurement, and duty check.
• Clamp maximum measurement conductor diameter: φ12mm
• Small and lightweight, palm-sized.
• The test lead tips are 19mm long, allowing them to fit into a power outlet. They are also gold-plated to prevent poor contact.

Digital multimeter with clamps and test lead storage on the back

 

Gold-plated test leads are used.

Tip: 19mm. Probe cover is removable.

 

Open clamp makes it easy to measure current even in tight spaces!

 

Names of each part (main body)

• ①Display section
• ②MODE button
• ③HOLD button
• ④Function dial
• ⑤Holster case
• ⑥Clamp sensor
• ⑦DCA ZERO button
• ⑧ Test leads
• ⑨ Probe cover
• ⑩ Barrier part of test lead
• $j Barrier part of clamp

Part names (display part)

• ①Fixed display
• ②Relative value
• ③Auto power off
• ④Diode test
• ⑤ Continuity test
• ⑥Measurement units
• ⑦Bar graph
• ⑧DC/AC
• ⑨ Battery low mark

▲Back to top of page

specification

Electrical Performance

	range	resolution	Accuracy
ACV	6.000m V	1m V	±(1.5 %rdg + 5 dgt) *0.1 Vrms~
	60.00 V	10 V
	600.0 V	100 V
DCV	600.0mV	0.1mV	±(0.8%rdg + 5dgt)
	6.600 V	0.001 V	±(1.5%rdg + 2dgt)
	66.00 V	0.01 V
	600.0 V	0.1 V	±(1.5%rdg + 5dgt)
ACA	100.0 A	0.1 A	±(3.0%rdg + 5dgt)
DCA	100.0 A	0.1 A	±(3.0%rdg + 5dgt)
Ω	660.0 Ω	0.1 Ω	±(1.0%rdg + 4dgt)
	6.000 kΩ	1 ohm	±(1.5%rdg + 2dgt)
	60.00 kΩ	10 ohms
	600.0 kΩ	100 ohms
	6.000 MΩ	1 kΩ	±(2.0%rdg + 5dgt)
	60.00M Ω	10 kΩ	±(3.0%rdg + 8dgt)
frequency	9.999 Hz	0.001 Hz	±(1.0 ±5 dgt)
	99.99 Hz	0.01 Hz
	999.9 Hz	0.1 Hz
	9.999 kHz	0.001 kHz
	99.99 kHz	0.01 kHz
	999.9 kHz	0.1 kHz
Capacitance (CAP)	9.999 nF	0.001 nF	-
	99.99 nF	0.01 nF	±(4.5% + 20dgt)
	999.9 nF	0.1 nF	±(3.0 ±5 dgt)
	9.999 μF	0.001 μF
	99.99 μF	0.01 μF
	999.9 μF	0.1 μF	-
	9.999 mF	0.001 mF
	99.99 mF	0.01 mF
DUTY %	20 to 80%	0.1%	-
frequency Hz	9.999 Hz	0.001 Hz	±(1.0% + 5 dgt)
	99.99 Hz	0.01 Hz
	999.9 Hz	0.1 Hz
	9.999 kHz	0.001 kHz
	99.99 kHz	0.01 kHz
	999.9 kHz	0.1 kHz

 

		Measurement range	Accuracy
frequency	alternating current	50 to 1 kHz	±(0.1% + 3 dgt)
	AC voltage	50 to 1 kHz	±(0.1% + 3 dgt)

 

Continuity check	Buzzer threshold: approx. 50 Ω
Diode Check	Forward voltage: Approx. 0.4 to 0.9 V Reverse voltage: .OL displayed

* Conditions: 23°C ±5°C, 75% RH or less * Accuracy: ±(__% reading + __dgt least significant digit)
* Accuracy guarantee for AC voltage, AC current, and frequency is limited to sine waves.
* - indicates no accuracy guarantee.

 

Function	Maximum rated input value	Notes Ω
DCV/ACV	DC 600V /AC 600V	Buzzer when DC/AC exceeds 600V
DCA/ACA	DC 100A/AC 100A	-
Ω, CAP, diode check, continuity check	(Voltage input prohibited)	DC 250V / AC 250V withstand voltage
Hz, %	(Square wave 5Vp-p standard)	DC 250V / AC 250V withstand voltage

General specifications

Detection method	True RMS
display	LCD, maximum display "6000", with bar graph (61 segments)
Range switching	Auto (Manual available)
polarity display	Automatic switching, only "-" displayed
Clamp maximum measurement conductor diameter	φ12mm
sampling	Approximately 3 times/second
Auto Power Off	Approximately 15 minutes (can be canceled)
Operating temperature and humidity	0 to +40°C, 80% RH or less (no condensation)
Storage temperature and humidity	-10 to +60°C, 80% RH or less (no condensation)
size	Approx. W 81 x H 135 x D 30 mm
weight	Approximately 200 g (excluding batteries)
power supply	2 x AAA batteries (sold separately)
accessories	Instruction manual (with warranty), 2 probe covers (pre-installed)
option	Alligator pin leads: ATL-4N , ATL-5N Soft case: CC-02
proofreading	Possible
Compliance standards	IEC61010-1 compliant CAT III 300V, CAT II 600V
JAN	4983621930030