CUSTOM Digital lux meter LX-3000 with LED mode: Top Choice in Selangor, Malaysia, Kuala Lumpur (KL), Puchong MTM Precision Sdn Bhd

Description

Product overview

LED mode support

*1 30 minutes (cancellable)

In addition to white light sources, illuminance measurement settings can be made assuming LEDs and fluorescent lights.

The sensor unit can be removed from the main unit, making it convenient for measuring in remote locations.
The sensor can be rotated 180 degrees while attached to the main unit.
Maximum and minimum illuminance display (MAX/MIN) function
Measurement value display (HOLD) function
Backlight function for easy viewing in dark places

Supports display of illuminance for LED and fluorescent lights

In addition to the illuminance of white light bulbs, the illuminance of LEDs and fluorescent lights can also be displayed as reference values.

light source	Assumed light source
White light bulb	2856K, white light bulb
LED lighting (daylight white)	5000K, 1100lm, 11W equivalent LED
LED lighting (warm white)	3000K, 1055lm, 11W equivalent LED
Green LED	LED with a color wavelength equivalent to 560nm
Red LED	LED with a color wavelength equivalent to 640nm
Blue LED	LED with a color wavelength equivalent to 480nm
Fluorescent lamp (warm white)	4000K, 1350lm, 18W equivalent fluorescent lamp
Fluorescent lamp (daylight)	6500K, 1275lm, 18W equivalent fluorescent lamp
Optional settings	-

*K indicates color temperature

The sensor angle can be adjusted and removed

Slide the sensor sideways to remove it from the main unit.
LX-3000 sensor angle adjustable

Part names

Main unit

Sensor cover
Sensor (light receiving part)
LCD display section
Power button/backlight button
HOLD button
MAX/MIN button/ button
Range switch button/% button
(Not used)
Settings button
Battery cover

display

Battery level display
Illuminance display
Light source setting display
Auto power off function display
MIN display
MAX display
HOLD display
SET indicator (lights up when in measurement light source setting mode)
Range display

360° rotating image

Clicking on the image will open a new window.

Sensor Spectrum

specification

Electrical Performance

range	Measurement range	resolution
200 lux	0.0 to 199.9 lux	0.1 lux
2000 lux	200 to 1999 lux	1 lux
20,000 lux	2000 to 19990 lux	10 lux
200,000 lux	20,000 to 199,900 lux	100 lux

Measurement accuracy	±3%rdg ±5 digits (with standard light source)
Accuracy Error	10°: ±1% 30°: ±2% 60°: ±5% 80°: ±20%
Temperature characteristics	±0.1% / (based on 25)

General specifications

Display update	0.5 seconds / 1 time
Auto Power Off	Approximately 30 minutes (can be canceled)
Operating temperature and humidity	0 to +40°C, 80% RH or less (no condensation)
Storage temperature and humidity	-10 to +50°C, 70% RH or less (no condensation, excluding batteries)
size	Body: Approx. W 63 x H 169 x D 37 mm Cord length: approx. 23-50 cm
weight	Approximately 230 g (including batteries)
power supply	2 x AA batteries
battery life	Approximately 80 hours (when using alkaline batteries)
accessories	Instruction manual, storage case
proofreading	Yes (standard light source only)
JAN	4983621200218

*Specifications and appearance may be changed without notice for improvement purposes.
*Continuous operating time may be shortened depending on the frequency and conditions of use.

Precautions when using a light meter

In addition to white light sources, illuminance measurement settings can be made assuming LEDs and fluorescent lights, but measurements for all LED and fluorescent light sources are not guaranteed.
Please note that there may be discrepancies between the actual measurements and those displayed on this device due to differences in color temperature, luminous flux, etc.
Calibration cannot be performed using an LED light source. Calibration must be performed using a conventional standard light source.
It does not support PWM (pulse width modulation) controlled lighting.
Illuminance meters are calibrated using a filament-type light bulb known as a standard light bulb as a standard light source. Fluorescent lamps and LED lighting, which are commonly used in general workplaces, have different wavelengths of light compared to standard light bulbs, so measurements may differ.
In such cases, it may be necessary to take measures such as measuring with multiple illuminance meters (different models from different manufacturers) and taking the average value.

More detail about MTM Precision Sdn Bhd