The Mediline therapy regulator operates on the indirect single
stage fixed pressure principle.This cylinder-mounted regulator for
use with oxygen is factory pre-set and locked with a tamper proof seal.
The regulator can be used for all hospital applications
and emergency use requiring a constant 4 bar operating pressure.
The regulator is supplied with a 5/8“
BSP RH (BS 341 inlet Bullnose connection No.3),
standard outlet fitting 3/8“ BSP and a pressure relief valve.
A pressure gauge is incorporated to register
the pressure of gas entering the regulator,
giving an indication of the cylinder contents.
This regulator is CE marked and fully
conform to the MHRA code of practice and
the European specification EN 738-1.
OXYGEN
Art. Nr. Description
0781660 Mediline S400 Regulator Bullnose Inlet, 3/8“ Outlet
TECHNICAL DATA
Type : Single Stage regulator conforming to European specification EN 738-1
Body : Brass-Ports stamped with high-pressure indication
Diaphragm : Safety burst pressure 3,500kPa (35 - 55 bar)
Inlet filter : Sintered filter (25 microns)
Valve seat material : Zytel
Inlet connection : 5/8” BSP RH (BS 341 connection No.3) for O2
Outlet connection : 3/8” BSP with 60O cone angle or quick release connection (BS 5682)
Pressure gauge : Solid bulkhead construction. Rear venting to EN 562.
Dial 0-2000 kPa (1/4,1/2 and full markings)
Pressure/Flow ratings
Inlet: 13700 kPa (137 bar)
Outlet: 400 kPa (4 bar)
Flow: 100 l/min
Pressure relief : Self re-seating type, leak tight at 600 kPa (6 bar) venting at 780 kPa (7,8 bar)
Operating temperature : [-20OC to 60 OC]use with medical gases)
Standard version available : Oxygen
Malaysia
